Markoos 1986 Aerodeck

[minimonster]

Hi All,

I'm a silent reader of this forum more than a jear now. I live in the Netherlands, and this is my aerodeck story:

In the Netherlands you don't have to pay road tax for cars that are 25 years old (or older offcourse). Our gouverment has stopped this rule for cars build in 1987 or newer.

So i bought a 1986 Aerodeck in februari 2009. It was a standard model, with no options at all. No electric mirrors, windows, roof, antenna.. No power steering...

http://www.markoos.nl/forum/3geez/aerodeck0-1.jpg
http://www.markoos.nl/forum/3geez/aerodeck0-2.jpg


As i'm a mountain bike rider, i was on the search for a towbar. I could find one new for the same price as another aerdeck WITH a towbar.
So i purchased my second aerodeck that month. It was also a 1989 basic model, but with electric mirrors.
I took it apart and kept almost all spares. And spliced the car for better storage (!)..

http://www.markoos.nl/forum/3geez/aerodeck2-1.jpg
http://www.markoos.nl/forum/3geez/aerodeck2-2.jpg
http://www.markoos.nl/forum/3geez/aerodeck2-3a.jpg
http://www.markoos.nl/forum/3geez/aerodeck2-3.jpg


Two months later a did find an german 1989 aerodeck, with the most options a wanted, for a good price. It has an automatic gearbox, ALB, and electric mirrors, windows and so on...

http://www.markoos.nl/forum/3geez/aerodeck3-1.jpg
http://www.markoos.nl/forum/3geez/aerodeck3-2.jpg
http://www.markoos.nl/forum/3geez/aerodeck3-3.jpg
http://www.markoos.nl/forum/3geez/aerodeck3-4.jpg

[minimonster]

Then came the challenge: swapping all the options to my 1986 car (!)

The ALB system is intergrated with the wire harness of the car. So i did had to change that. And if you have to remove the wire harness of the car, everything have to come of... I wanted the automatic box as well, so the engine had to come out, the pedal box, ....

But in the end it took me 3 weeks to swap everything. And it works (!) all.

I even put a cruise control in it, and converted the injection engine to carb.
On a carb engine it's $1000 cheaper to build LPG, witch is much cheaper to run if you don't have to pay road tax....

I bought 16" wheels from a New Mini, ET 45 4x100 ... thank you BMW for that..

Marko alias minimonster

http://www.markoos.nl/forum/3geez/aerodeck1-1a.jpg
http://www.markoos.nl/forum/3geez/aerodeck1-1b.jpg
http://www.markoos.nl/forum/3geez/aerodeck1-1.jpg
http://www.markoos.nl/forum/3geez/aerodeck1-2.jpg
http://www.markoos.nl/forum/3geez/aerodeck1-3.jpg
http://www.markoos.nl/forum/3geez/aerodeck1-4.jpg
http://www.markoos.nl/forum/3geez/aerodeck1-5.jpg

[A18A]

awesome work :thumbup:

[minimonster]

My nickname is because i used to "remanufactere" classic mini's with honda technics!

http://www.minisevenclub.nl/forum/viewtopic.php?t=39835

Sorry the link is to a dutch website, but i think that the pictures give you an impresion..

I sold al mini's now and i do only Honda's now.

[Hondamonster]

killed 3 aerodecks to build one carb'd, automatic one. haha thats a first. at least you've got exactly what you want now!

[Fedor B.]

Nice work! Like Aerodeck pics and evenmore Dutch ones.
Show us a picture of your S800, i think it's allowed...

[minimonster]

Nice work! Like Aerodeck pics and evenmore Dutch ones.
Show us 8 pictures of your S800, i think it's allowed...

I bought my S800 in boxes ... this winter/spring/summer i'm rebuilding it..


Marko

http://www.markoos.nl/forum/3geez/s800-1.jpg

http://www.markoos.nl/forum/3geez/s800-2.jpg

http://www.markoos.nl/forum/3geez/s800-3.jpg

http://www.markoos.nl/forum/3geez/s800-4.jpg

http://www.markoos.nl/forum/hvn/s800-2.jpg

http://www.markoos.nl/forum/hvn/s800-4.jpg

http://www.markoos.nl/forum/hvn/s800-8.jpg

[Fedor B.]

Kerel! Super nice!
Deep respect, is there a S800 forum where i can follow your project?

[minimonster]

Kerel! Super nice!
Deep respect, is there a S800 forum where i can follow your project?

No s800 forum, but a dutch HondaFriendsForum:

http://india.messageboard.nl/4339/viewtopic.php?t=1174

[2drSE-i]

Wow that Mini is insane...I see where you get your metalworking skills lol. Enjoy your stay here!

[ghettogeddy]

ya i cant say ive seen anyone go from fi to carb and 5speed to auto lol
def a 3gees first

but great work smart idea cutting up the car to put in the rafters so you have spare parts if any cancer builds up

[A18A]

that s800 project looks awsum. I'm teh jealous

[2ndGenGuy]

:bow::bow::bow: This is so awesome! Nobody here in America loves their Accord that much, there must be so many fewer in Europe or something... And great work on the S800! So amazing! Looks like you do your work very thorough and proper!

[charliekuney]

I wanna see the Mini Cooper! <3

[forrest89sei]

Holy Shit!!!!! Amazing Builds!!! Welcome :wave: :bow:

[frantik]

very cool.. but as others have said very unusual to go from stick shift and FI to automatic and carbed.. :)

[minimonster]

Hi all,

Yeah, it maybe not an unusual conversion, from fi to carb.
But it's much easer (and cheaper) to convert an carb engine to run on Gaz.


And maybe i'm not completly normal :omg: (!)
I thought this is a 3gee forum... but here some pictures of my mini build..


http://www.markoos.nl/forum/3geez/mini-1.jpg

http://www.markoos.nl/forum/3geez/mini-2.jpg

http://www.markoos.nl/forum/3geez/mini-3.jpg

http://www.markoos.nl/forum/3geez/mini-4.jpg

[bryan6732]

Took a while, but also a warm welcome from another Dutch member ;)
3gee looks great (S800 and mini as well... :))

I also have never heard about someone swapping FI to carb and 5speed to auto, but there are more people on this board who aren't completely normal :lol:

[Hondamonster]

it is a 3gee forum, but we like cool, interesting stuff, which you seem to have a lot of

[AccordB20A]

cool, someone whos putting a ZC into a mini not a b16a. it will still go hard

[Dr_Snooz]

My nickname is because i used to "remanufactere" classic mini's with honda technics!

http://www.minisevenclub.nl/forum/viewtopic.php?t=39835

Sorry the link is to a dutch website, but i think that the pictures give you an impresion..

I sold al mini's now and i do only Honda's now.

Wow. Just wow. Welcome! :bow:

[frantik]

http://www.markoos.nl/forum/3geez/mini-3.jpg

that pic rules

[minimonster]

Hi,

Last month, we celibrated the 25th anniversary of our Aerodeck!
And he did get a new exhaust and some other new parts..

But my supplier did have a 4drs saloon exhaust instead of a Aerodeck exhaust, it did need some modification :) ..

http://www.markoos.nl/forum/3geez/exhaust1.jpg

http://www.markoos.nl/forum/3geez/exhaust2.jpg

http://www.markoos.nl/forum/3geez/exhaust3.jpg

http://www.markoos.nl/forum/3geez/exhaust4.jpg

http://www.markoos.nl/forum/3geez/exhaust5.jpg

[minimonster]

Rust is also a bit of a problem (and a dent in my door)

http://www.markoos.nl/forum/3geez/door1.jpg

So I painted a set of wings in blue

http://www.markoos.nl/forum/3geez/wings1.jpg

And also a door and bumpers...

http://www.markoos.nl/forum/3geez/bumper1.jpg

http://www.markoos.nl/forum/3geez/bumper2.jpg

Because my aerodeck has remote door locks, i figured why has my door a key lock? I found a 4drs saloon on a yunkyard, and i bought the door handles of the rear doors...

http://www.markoos.nl/forum/3geez/paintedparts1.jpg

Alle the painting still need some clear coating, i will take some nice pictures when my aerodeck is finnished...

[MessyHonda]

wow ...looks really good

[Fedor B.]

Nice! I like your work.
How is the S800 doing?

[minimonster]

Nice! I like your work.
How is the S800 doing?

S800: waiting on parts from Japan...

[Dr_Snooz]

Nice! Good to see you working on it.

[A18A]

that underbody is so clean!

[Tdurr]

this thread is pure win

[thered56]

Man, this stuff is awesome. Nice skills. I love the Mini, and love S800's as well. Say do you have solid motor mounts in that Mini, that's such a tight fit. Unreal man.

[minimonster]

Man, this stuff is awesome. Nice skills. I love the Mini, and love S800's as well. Say do you have solid motor mounts in that Mini, that's such a tight fit. Unreal man.

Thanks all for the complements of my projects....

The Mini has normal rubber engine mounts..

I got my front wings from Japan, í'm working on the engine now..

It need some new pistons and a rebore of the cilinders..
I got the pistons already and a machineshop is working on the rebore..

http://www.markoos.nl/forum/hvn/motor8.jpg

http://www.markoos.nl/forum/hvn/motor9.jpg


On my 3G, the painted bumpers are a major upgrade.

http://www.markoos.nl/forum/3geez/aerodeck1-6.jpg

And the lock-less doorhandles...

http://www.markoos.nl/forum/3geez/aerodeck1-7.jpg

[HON-DUH]

Very nice!

I want an aerodeck!!

[Tdurr]

sex!

[Fedor B.]

Bumpers and doorhandles looking very good!
Engine looks complicated...

[Fedor B.]

Hee, how was the classic Honda meet in Germany?
Made any nice pics?

[usj101]

Thanks all for the complements of my projects....

The Mini has normal rubber engine mounts..

I got my front wings from Japan, í'm working on the engine now..

It need some new pistons and a rebore of the cilinders..
I got the pistons already and a machineshop is working on the rebore..

http://www.markoos.nl/forum/hvn/motor8.jpg

http://www.markoos.nl/forum/hvn/motor9.jpg


On my 3G, the painted bumpers are a major upgrade.

http://www.markoos.nl/forum/3geez/aerodeck1-6.jpg

And the lock-less doorhandles...

http://www.markoos.nl/forum/3geez/aerodeck1-7.jpg

Any update ?

[GreyACR]

Any update ?

Last update was 12 years ago.