PDA

View Full Version : Fault in charging stytem?



Christofur
01-17-2011, 04:59 PM
Last week i was driving on the freeway and my alternator light come on.:nervous: i thought it was just my battery cause we have had some cold weather here during that week. so i charged my battery all the way and put it back into my car and the light still came on..with the car off the battery is 12v and the car running the battery is 14v.

i was reading on here that the start cause be bad. so i took that off and had it tested and it works 100% they said.

is there any other way so test the alternator without taking it out?

Dr_Snooz
01-17-2011, 08:09 PM
Sorry. Laboring under the assumption it was a 3g.

lostforawhile
01-17-2011, 09:15 PM
there's a good chance the regulator is bad, or the alternator brushes are bad, it may show 14 volts but it really needs to be load tested, for one thing, test the car at idle with everything electrical on, lights, defroster etc and see what it reads

2ndGenGuy
01-17-2011, 10:47 PM
Do you know if your car has the 3 wire or 4 wire alternator? I had a couple alternators go dead on me in my 84. Once you get used to pulling that driver's side axle, it's not so bad. I can come up and do it for ya in about an hour. ;) I only have about 100 miles left on the break-in on my 81, and I can drive up.

Christofur
01-18-2011, 02:39 AM
It looks like Wednesday i need to take it out. i have never taken off an axle before if you wanna drive over here that would be nice.

2ndGenGuy
01-18-2011, 10:43 AM
Wednesday the 19th? Like tomorrow? I might be able to swing that.

Christofur
01-18-2011, 02:02 PM
Yes like tomorrow. I'm free the whole day.

lostforawhile
01-18-2011, 02:13 PM
mini meet!! someone take pictures, too bad you are on the wrong side of the country.

2ndGenGuy
01-19-2011, 01:14 AM
lulz, we just had the mini-meet, lost.

PM me your info Christofur, and I'll head up after work. Though I might wait until after traffic dies down a bit. Or maybe not, I'll let you know.

Christofur
01-20-2011, 02:18 PM
Problem solved it was the alternator.

and i didnt have to take the axle off to get the alternator off it wouldn't fit so i just took the master cylinder off and pulled it from the top.

ty john for coming up and helping me.

2ndGenGuy
01-20-2011, 02:52 PM
Even after you took the bracket off, it still wouldn't come out? FFFFFFUUUUUUU

That's cool you got it out by removing the M/C, sorry that I made you take the long route.

At least she's up and running now. Glad we didn't put that FUBAR alternator in there.

Christofur
01-20-2011, 05:07 PM
well in least i know how to replace an axle if i ever need too...
the second one felt way better. I'm glad you checked that because i wouldn't have.

but man i need to fix that oil problem shes a mess under there...

rideordie12
01-21-2011, 09:28 PM
CLEAN AS FU*# SE-I in buckley for $350 hit it up its got good everything (minus auto trans) im going to look at it tomorrow
figured you might wanna know cause its low $$$ and fuel injected like yours..
[email protected]

Christofur
01-22-2011, 02:32 AM
really wish i had some cash.
the only thing i would want are the seats if not ripped.