PDA

View Full Version : whos h22 5 lug 3g is this


SQ is the SQUAD
02-12-2011, 09:20 PM
came across this on facebook, no more info

http://img17.imageshack.us/img17/6228/h223g.jpg
charliekuney
02-12-2011, 09:27 PM
I could set an H22 in an empty engine bay and set my car on 5-lug wheels without axles and call it good. No video, no proof, no nothing?
A18A
02-12-2011, 10:00 PM
i put a h22 in my accord engine bay once but the engine was too wide to fit past the frame rails properly while keeping p/s, I'd like to know how others kept their p/s with h22 swaps =/
MessyHonda
02-12-2011, 10:57 PM
look at Malaysia they do crazy swaps...tommy has posted some pics
SQ is the SQUAD
02-13-2011, 05:57 AM
well u can clearly see no drivers mount and there does look like there nothing behind the rim. just asking
2oodoor
02-13-2011, 08:16 AM
well u can clearly see no drivers mount and there does look like there nothing behind the rim. just asking

I agree, its all just propped in there... for shits and giggles.



And Tommy is in Thialand Jesse :flash:
89T
02-13-2011, 08:56 AM
If you look at the wheel its tucked in there alittle too good.
MessyHonda
02-13-2011, 10:58 PM
I agree, its all just propped in there... for shits and giggles.



And Tommy is in Thialand Jesse :flash:

yes you are right i went with my gut feeling...thanks for the correction Roo
ShyBoyCA6
02-13-2011, 11:03 PM
huh i seen this somewhere before i think he drives a 2006 accord coupe and has a 3gee as the project. ill try to find his face book.

heres his car album:http://www.facebook.com/photo.php?fbid=180017372042197&set=a.180016752042259.39458.100001018078186&theater

well it looks like there nothing there and looks like they are his old accord wheels just under the car.
charliekuney
02-14-2011, 10:35 AM
Hmmm, after staring at those for a while, the pinstripe from his coupe doesn't seem to match the one with the H22 "swap". Plus, his ghetto wrong date print isn't there.

Woah, woah: he's friends with some people from 3geez...?
Legend_master
02-14-2011, 10:55 AM
There is definitely no suspension attached to those wheels, and that engine is leaning way to far back to actually be mounted in place. Would be a badass car if it were actually done.
Rendon LX-i
02-14-2011, 10:57 AM
Seems like the rim just there not even bolted up. Half ass swap. There was a guy near me like 1 hr away. Motor in and axles in. Just needed the wiring done. I could of done that. BUT he said it sat so long that he didnt know if the motor ran.
Nio
02-14-2011, 11:41 AM
Hmmm, after staring at those for a while, the pinstripe from his coupe doesn't seem to match the one with the H22 "swap". Plus, his ghetto wrong date print isn't there.

Woah, woah: he's friends with some people from 3geez...?

>.> I kinda sent him a FR. :D

he accepted it and likes my 3g.
hondalude86
12-25-2011, 04:26 PM
I know its beensaid more than once but you can see the ground through the wheels easy, but seems like alot of trouble to just take a picture!
gfrg88
12-26-2011, 02:41 PM
hasn't there been a 5 speed lug swap before??? :dunno:
hondalude86
12-26-2011, 04:52 PM
Really it wouldnt be that hard, the wheel bearings used in our hondas are the same as all the others. If you swapped the inner hubs out, itd be done no problem
ThePhantum
01-15-2012, 12:34 PM
Really it wouldnt be that hard, the wheel bearings used in our hondas are the same as all the others. If you swapped the inner hubs out, itd be done no problem

Has any one done this?? Been searching to see if there is a DYI thread on this but haven't found one yet.
Tomisimo
02-08-2012, 01:55 PM
Yes, its been done, but whats a point in doing that? there is tons of wheels we can use, and there is a custom parts list for custom build big brake kit. There is nothing to gain, not really winth 5lug.
stat1K
02-08-2012, 02:06 PM
^ good point, i never understand the five lug swap beyond trying to be a baller...
Hazwan
02-08-2012, 08:37 PM
^ good point, i never understand the five lug swap beyond trying to be a baller...

Word. Its not like you guys have some rare ass 4x120 or anything -.-

:(
Tomisimo
02-08-2012, 08:50 PM
Custom ;)

Go get some used 14/15" BBS from germany, than order new bolts and outer ring, they are not that expensive if you keep your lip in check, cuz they range in price. than weld bolt holes and get a shop to machine you a new patern say 4x120. powder cote to mutch your cool orange car and youre set. it can be done for half price of shelf price.