View Full Version : Weber Swap Into '79 Accord Hatch
forrest89sei
03-27-2011, 04:22 PM
No its not mine, Just ordered a Redline Weber 32/36 Kit for my friends 1979 Accord Hatchback, The car was given to her by her grandmother who daily drove it, has 125K on it, paint needs work.
Currently she's been driving a 1984 Chevy Caviler 2.0 Auto as her daily which has lit a fire :devil: under her to get her beloved 1G Back on the road.
Only pic I have at the moment :
http://i55.tinypic.com/bhwokk.jpg
More less crappy pics to come! And she'll be joining the forum soon
Forrest
AccordB20A
03-27-2011, 08:45 PM
mean
2ndGenGuy
03-28-2011, 08:25 AM
Yay for new carby! No emissions in your area? I thought all of California was anti-car?
MessyHonda
03-28-2011, 06:15 PM
Yay for new carby! No emissions in your area? I thought all of California was anti-car?
with money you can pay people to look the other way...thats the only reason i keep on working on mine
forrest89sei
03-29-2011, 12:00 AM
Yay for new carby! No emissions in your area? I thought all of California was anti-car?
In California there is a county, a county called "Tuolumne" a county where you only have emissions testing when you are Transferring Title on a Car, That county is where I live :flash: and I start the bidding on PO Boxes to Reg your car at at $100 LOL JK.
But yeah update I will be helping my friend install the carb on this Sat, Pics to follow :D
forrest89sei
04-02-2011, 06:34 PM
Well Some Progress was made today!
http://i51.tinypic.com/2ic4lg9.jpg
http://hphotos-snc6.fbcdn.net/210404_193097417392671_100000772421683_451641_2912 054_o.jpg
http://hphotos-snc6.fbcdn.net/194222_193097494059330_100000772421683_451642_3191 329_o.jpg
http://hphotos-snc6.fbcdn.net/195038_193097937392619_100000772421683_451644_3957 115_o.jpg
http://hphotos-ash4.fbcdn.net/201575_193097597392653_100000772421683_451643_6148 352_o.jpg
After Priming the Carb, We got the car started and Idling, YAY still need to adjust the Air Fuel Mix but it's doing ok.
Now I come to the part that we're still trying to figure out the Linkage!
We tried pulling the linkage off the factory carb, and after messing with a bunch of little cotter pins and a lock pin we still cant get the shaft off!
What have you guys done to make the Weber work with your factory cable?
Thanks
Forrest
Hazwan
04-02-2011, 07:15 PM
Wish I could help with the linkage but WANTS the carb :D
forrest89sei
04-03-2011, 03:00 PM
Wish I could help with the linkage but WANTS the carb :D
Yeah you should fly to america and help Wire tuck and paint the car :D :D :D
Anyway My Friend Bonnie, who owns the car just joined the forum, her S/N is razcal1 so I'm sure she'll be posting soon :rockon:
2ndGenGuy
04-04-2011, 10:14 AM
I used the Weber linkage that came with mine. Then I modified my cable to work. Basically, I just cut the end off the cable, and soldered a ring terminal onto the end of it, then you can just bolt the ring terminal onto the Weber's linkage. It works pretty well, but not as well as I would like...
Xaisk
04-04-2011, 10:34 AM
Yeah you have to modify the cable it came with. Everyone does it a different way so you have to find out what works for you.
The weber looks so friggen tiny on that intake manifold haha
forrest89sei
04-04-2011, 08:41 PM
just a thought but does the electronic choke need to be hooked up to adjust the mixture, cause its running rich any help on this from anyone out there would be awsomeand the mixture screw is as lean as it can get without taking it out.
2ndGenGuy
04-04-2011, 09:07 PM
If the electric choke is not hooked up, the choke will always be fully engaged... which, yes, causes a rich condition. There's a wire going to the stock carburetor that can be snipped and run to the choke straight out of the stock harness directly behind the carb on the firewall... Can't remember what color I used though...
forrest89sei
04-04-2011, 09:15 PM
If the electric choke is not hooked up, the choke will always be fully engaged... which, yes, causes a rich condition. There's a wire going to the stock carburetor that can be snipped and run to the choke straight out of the stock harness directly behind the carb on the firewall... Can't remember what color I used though...
Thanks John!
We just got the linkage hooked up, car is idling. Tomorrow we will get electronic choke going :D
heres a couple crappy cell pics :D
http://hphotos-ash4.fbcdn.net/210065_193562924012787_100000772421683_454357_2595 247_o.jpg
http://hphotos-snc6.fbcdn.net/204420_193562884012791_100000772421683_454356_2536 682_o.jpg
http://hphotos-snc6.fbcdn.net/192079_193562974012782_100000772421683_454358_5218 327_o.jpg
Hazwan
04-04-2011, 10:05 PM
I believe the wire should be black with yellow stripe (they come on only when the key is on the ON position)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.