86dxhatch
05-02-2011, 07:45 PM
Alright , I've been gathering parts to revamp the suspension on my hatch. I'm basically doing this as a preventative maintenance measure, and not need to worry about it for a long time.
I don't think anything is that bad besides my tie rod ends and maybe ball joints. My car also has 210k so the springs,shocks are tired as well. But anyway I want to replace everything I can while I have it apart.
The front is my first concern, since I replaced the rear UCA's when i first got the car and the rear has given me no problems since.
So far I have; Front
New UCA's w/balljoint + bushings- Beck Arnley 555
Lower balljoints- 555
Wheel bearings- Beck Arnley
Tierod ends, inner + outer Lemforder, Beck Arnley
Springs, oem replacment TRW
Shocks, KYB GR2
Still need;
Strut rod bushings
Strut fork bushings, <-Do these need to be burned out?
................???
I've heard that the radius rod bushings are also a good thing to replace but I cant find them on rockauto. Anybody know where to find these?
I plan on replacing my sway bar with a Lxi one when I find one. I'll wait to get new bushings for that.
Anything else that should be replaced while I have everything apart?
Thanks for any advice.
I don't think anything is that bad besides my tie rod ends and maybe ball joints. My car also has 210k so the springs,shocks are tired as well. But anyway I want to replace everything I can while I have it apart.
The front is my first concern, since I replaced the rear UCA's when i first got the car and the rear has given me no problems since.
So far I have; Front
New UCA's w/balljoint + bushings- Beck Arnley 555
Lower balljoints- 555
Wheel bearings- Beck Arnley
Tierod ends, inner + outer Lemforder, Beck Arnley
Springs, oem replacment TRW
Shocks, KYB GR2
Still need;
Strut rod bushings
Strut fork bushings, <-Do these need to be burned out?
................???
I've heard that the radius rod bushings are also a good thing to replace but I cant find them on rockauto. Anybody know where to find these?
I plan on replacing my sway bar with a Lxi one when I find one. I'll wait to get new bushings for that.
Anything else that should be replaced while I have everything apart?
Thanks for any advice.