PDA

View Full Version : What is your horsepower?


3rdGenFanatic
10-13-2002, 07:50 PM
How many horses are you guys running?:rice:
Mantis88LX
10-13-2002, 08:13 PM
cool your in Birmingham?
Sean
10-13-2002, 08:38 PM
hmmm right now a stock 98hp carb. ive had over 250hp. and currently im shooting for a pump gas friendly 225hp.
dXsquared
10-13-2002, 08:44 PM
i have 98 hp plus a straight exhaust(no cat or muffler) and no air cleaner. that probably equels 110 hp? a weber and header will be here in 2 days... lots more with that... then in another week i recive my COLT cam. another butt load of power!

Travis
staticpat
10-13-2002, 09:01 PM
yay! another alabama person. many of whom run multiple horses on a ranch.
dXsquared
10-13-2002, 09:13 PM
holy shit? is this a gag? all u guys are from AL. that state has lots of farms and cow boyz! is this a joke or is it serious?
Travis
YK86
10-14-2002, 01:11 AM
A run with my G-tech says 110 at the wheels. But that was estimating the weight so it's probably not that accurate.
shepherd79
10-14-2002, 04:25 AM
probably around 105 at the flywheel or around 90 at the wheels.
Site
10-14-2002, 06:41 AM
Next Ohio meet we should all take a trip to a dyno or a track, or a track with a dyno. LOL. Man, that would be cool.
OldSchoolSwap
10-14-2002, 07:15 AM
I was about 250 hp but will be soon again! :)
shepherd79
10-14-2002, 08:31 AM
OldSchoolSwap what were you running? i know it was B16a but what else?
1989se-i
10-14-2002, 10:27 AM
...135hp?
dhcarss
10-14-2002, 11:05 AM
holy shit? is this a gag? all u guys are from AL. that state has lots of farms and cow boyz! is this a joke or is it serious? thats some funny shit. We have a few paved roads down here on the farm.:lol Now all we need to do is meet up.. Where in Birmingham do you live? Do you ever go to the street races on saturday nights? Ive seen a few down there but never get to talk to anyone. later.
1988starter
10-14-2002, 12:02 PM
122 + I do not like to say because it is not accurate to say a damn intake gives you 10 horse and another 10 from a catback system so I will say 122 plus 2.25 mandrel bent dynomax catback highflow cat 4-2-1 headers AEM intake with K&N filter MSD 6AL MSD blaster 2 coil accel wires NGK irridium IX plugs magnetic fuel line I habe played witht the timing for peformance and my engine has a full tune up with perfect valves and good compression.


Old school you should also mention that the 250 is with a decent shot of nitrous I think 80 shot but not sure.
Jdub07
10-14-2002, 12:12 PM
I have no idea how much HP I have. I know I have 98 hp with the carbed dx I added a striat pipe and a magnaflow muffler with my lid flipped...I wonder how much those things give me? Maybe 103? HAHA
A20A1
10-14-2002, 12:20 PM
somewhere between 125 - 150.
OldSchoolSwap
10-14-2002, 01:02 PM
Yes it includes a 60 shot dry. I don't normally include it unless they ask. Why? because if turbo user's don't specify their PSI, why should i advertise my N2O shot? Its all horse power anyway, right? ;)
MoonScryer
10-14-2002, 02:57 PM
60 if I'm lucky. Think I got most of that out of getting it running again :D

Really need to get around to putting a motor in with less that (now) 315,000 mi.
merlindavis
10-14-2002, 10:58 PM
i'm at about 143 on my stock jdm b20a in my 3g lude...
3rd GEN
10-15-2002, 09:50 AM
i think i am about 105 or so
give or atke a few
3rd GEN
10-15-2002, 09:51 AM
but once i get my b18c5 in there.. i will be at 205 stock!!
muhahaha
then add all the goddies ontop..
Darkside
11-01-2002, 09:48 AM
I g teched my car 3 days ago and got 120 in a 3rd gear to 2nd gear downshift.
Coroncho80
11-02-2002, 05:55 PM
135 on my Sei
pmip
11-02-2002, 06:10 PM
For the winter - probably less than 98hp (it's a 14 year old engine)
jigga225
11-02-2002, 08:08 PM
I got the stock 98 hp, but
17inch blades
and knock knock in the trunk
so probrably bout 88hp
A20A1
11-02-2002, 08:20 PM
I had to decrease valve diameter to make up for the fact that I could only select 4 valves per cylinder. the rest of the data was accurate... to the best of my knowledge.
Jims 86LXI HB
11-03-2002, 10:11 AM
Ya know mike at first glance your desk top dyno doesn't even look like it gave even ballpark figures. But the problem is in how the graph numbers are set. 0 to 300hp should make up the whole page not just the a tiny portion of the bottom. It's making it look like you have a nice flat power curve when you definately don't. Any way to reset the numbers used in the graph?

I wonder how accurate those programs are compaired to their results and doing a dyno run.
A20A1
11-03-2002, 11:16 AM
I'll try
AZmike
11-03-2002, 10:00 PM
Originally posted by funstick
hmmm right now a stock 98hp carb. ive had over 250hp. and currently im shooting for a pump gas friendly 225hp.

Wow, what all did that take? Header, intake, exhaust, cam, ignition, better carb, anything else?
89LXiCoupe
11-03-2002, 11:28 PM
I don't think I have the stock 120 hp. I'm guessing maybe 115 due to its age. I'm all stock with an intake and I'll keep it that way since I'll be investing in my new car. My brother could do whatever he want with it once I hand him the keys.