View Full Version : D-Series swap? Possible?
neo_blue_accord
05-26-2011, 12:35 AM
Hey I want to know if a D-series engine will bolt into an 89 sedan. Searched and found nothing. Help would be nice.
ghettogeddy
05-26-2011, 12:46 AM
nothing will just bolt in besides the b20a3 from the jdm accord they do make mount kits for other b series but not a d
b20a3 is from a 3g prelude. d-series also does not bolt right in, but it doesn't look like it would be difficult to make work if you have the know-how and can fabricate mounts and stuff
Tdurr
05-26-2011, 01:09 AM
pointless swap to try imo.
ghettogeddy
05-26-2011, 02:00 AM
b20a3 is from a 3g prelude. d-series also does not bolt right in, but it doesn't look like it would be difficult to make work if you have the know-how and can fabricate mounts and stuff
thats right its just a b20a that fits no number
neo_blue_accord
05-26-2011, 02:09 AM
Well its going to the crusher. Thanks.
MessyHonda
05-26-2011, 11:57 PM
unless you are good with a welder to make mounts the d16 wont just bolt up
neo_blue_accord
05-27-2011, 12:31 AM
I havn't welded in a long time. I just thought of this would a F22A1 engine from a 90's accord bolt in? Probably not cause honda is stupid. Thats what I have learned from owning one.
MessyHonda
05-27-2011, 12:48 AM
I havn't welded in a long time. I just thought of this would a F22A1 engine from a 90's accord bolt in? Probably not cause honda is stupid. Thats what I have learned from owning one.
yeah the cb7 do have bolt on stuff we didnt get them because most of the cool stuff was not offered till later year
neo_blue_accord
05-27-2011, 01:14 AM
Hate seeing this car sitting in my garage just waiting.
this swap can't not be done end of story!
Indeed :)
http://img854.imageshack.us/img854/697/jpg161resize.jpg
ShyBoyCA6
05-27-2011, 04:32 AM
you guys didn't even put a good D-series engine into it... its a D15 non vtec... next time atleast put a D16Z6 that has vtec.....
stat1K
05-27-2011, 07:36 AM
honda's not stupid just the 3rd gen accord is a bastard.
good luck finding a b20a, i'd buy mounts for 350 from innovative and with a little wiring you can put a real b-series in there not one of these b20a nonsense motors.
Edison Carasio
08-01-2011, 04:58 PM
Hate seeing this car sitting in my garage just waiting.
Then just put another A series in it from a junk yard car.
AccordB20A
08-01-2011, 09:26 PM
you guys didn't even put a good D-series engine into it... its a D15 non vtec... next time atleast put a D16Z6 that has vtec.....
i dunno who even bothered putting that motor into an accord. my guess is thats a SOHC ZC motor. 130PS. pretty much the same as the top spec d series output anyway without the vtax y0
honda guy
11-23-2013, 06:37 PM
Indeed :)
http://img854.imageshack.us/img854/697/jpg161resize.jpg
Tell me more about this??? Like what cv's are used?
Tdurr
11-24-2013, 02:10 AM
Ghost!
2oodoor
11-24-2013, 06:33 AM
Ghost!
Zombie, it's in plain sight:gun:
Rendon LX-i
11-30-2013, 06:00 PM
................
Tdurr
12-01-2013, 12:25 AM
I was talkin bout this being brought back from b the dead. ..
Idk bout you lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.