head gasket ?

[pink_sleeve]

Are all the gaskets in these kits all you need or do you guys not reccomend going with felpro?

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Head-Gasket-Set-Felpro_3200914-P_101_R%7CGRPGASKAMS_1419199355____

[YK86]

I have never had issues using Felpro headgasket sets. The kit should include everything for both carbed and EFI motors so you will end up with left over gaskets.

[cygnus x-1]

Felpros are good. That set is everything you need for a top end rebuild, but if you're doing an entire engine you also need the "conversion" gasket set that has the crank seals, oil pan gasket, and all the others that go on the block.


C|

[pink_sleeve]

I'm guessing a set like this would be a bit better value since i planned on doing the oil pan and oil filter basemount gasket also. As well as replacing the timing belt and water pump. It looks like this includes pretty much everything or are there some of the gaskets i should only use OEM for?

http://www.rockauto.com/catalog/moreinfo.php?pk=1817716