my A to Bseries swap

[Maybach310]

http://img707.imageshack.us/img707/696/28972321786251816631127.jpg (http://imageshack.us/photo/my-images/707/28972321786251816631127.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)



http://img266.imageshack.us/img266/6204/img20111219004729.jpg (http://imageshack.us/photo/my-images/266/img20111219004729.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Maybach310]

motor specs:
b20b block with micropolished crank with acl race bearings arp rod bolts n aries high compression pistons brand new itr oil pump water pump an all new seals.

GSR HEAD:
Fully ported n polished head from portflow standard size valves with a 3 angle valve job skunk2 stage 2 cams victor x manifold with 70mm trhottle body n 310 rc injectors.

My car was carburated so it was alot more work than a fuel injected model i had to run a new fuel line from the gas tank all the way to the front n buy an after market fuel filter. I also had to change out my gas tank since all of the inside is different on the tanks.

TRANNY:
it was a 2000 civic si b16 tranny but swith out the case with a ys1 cable case inner n outer with all new syncrhos from HONDA n i am using a stage 2 competition cluth on it

MOUNTS&linkage:
i am using the innovative mounts with a 95a insert stiffness there the ones before full metal mounts. i am using my stock shift linkage with a b series end welde to the shifter where it connects to the tranny.

AXLES:
i am using 96-01 integra axles but aftermarket they r made to hadle 500hp the are insane shafts by insane Mike.

EXHAUST:
i am running a tri Y header with 2 1/2inch pipping with u bends an a 2 1/2inch magnaflow.

WIRRING&ECU:
i am running a chipped p28 n on my wiring it is all custom work by my friend we rerouted every single wire on the car n made it all obd1 so i wont run a jumper harness i am not using the ecu plugs under the seat my ecu now plugs in on the kicker pannel on the passenger side like the crx does.

[A18A]

it's cool how these motors look stock in our engine bays

[Rendon LX-i]

Nice. I would of already been done with mine but I'm building mine completely

[2ndGenGuy]

^ Excuses, excuses... :kekeke:

[Maybach310]

that's a fully built motor looking to make 230hp to the wheels

[gfrg88]

:Owned:

[gfrg88]

Sick shit man!!! Def need more info on everything! :thumbup:



Soo glad to see interest in these cars picking back up!!! :D

[poncho-lx]

230hp to the wheels OMG :bow:

[Legend_master]

Very nice, have you heard her run yet? Is it a 2.0 liter?

[2oodoor]

Very nice, have you heard her run yet? Is it a 2.0 liter?

yeah yeah is it is it? lol
srsly can't quite see the id stamp on it...
welcome

[Legend_master]

yeah yeah is it is it? lol
srsly can't quite see the id stamp on it...
welcome

ID stamp means nothing if you bore it :naughty: .

[Maybach310]

its a b20 block n not fired up yet where doing a full wire tuck on it so we r re routing all of the wires

[obdriver6]

WOW! You sure made a big leap, from a little A20A1 to a BEASTLY B20v!

[Rendon LX-i]

No excuses is correct. But I also saw the word WE when it's just me. . Lol. No but it's hard when you a full time student an have a family. It's easier for a guy to do this without all the worryies.

But b20 Vtec . Going to be sweet. I'll BE looking at 200hp. Looking forward to see it going .

OWNED? Me? Never. Remember this is a project not a race. In no means I'm in a rush to get my shit done.

[gfrg88]

I feel you there with fam and crap Josh! I rarely touch my car right now.. work, fam, and school kills my time!

Can't wait to see this thing all done, man. Wire tuck will def make it sexy :D

[89T]

maybach310 whats you'r name.

[Vanilla Sky]

maybach310 whats you'r name.

Not sure, but I'm thinking about changing his login name to FastSwap!

Looks good, man. 200 HP is plenty to make these cars scoot.

[Maybach310]

@rendon i know what u mean i have only been able to work on it 1 day the past week.

@obdriver6 yea i am i had the same set up on my civic but i sold it n now that i have this me n my friend decided to do it since the a20 makes no power n it was slow n carburated plus its also different.

[Maybach310]

info updated on second reply

[Maybach310]

u gotta look this close to c some wires on it

http://img847.imageshack.us/img847/8986/img20111220210150.jpg (http://imageshack.us/photo/my-images/847/img20111220210150.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[AccordB20A]

oh how tidy of you:) looks ncie

[MessyHonda]

sweet swap

[hondalude86]

Dude that looks wicked! Im not sure what i like more, my a18 or my b16!

[gfrg88]

Dude that looks wicked! Im not sure what i like more, my a18 or my b16!

I love them both :)

[neo_blue_accord]

that's sweet. I have been thinking about putting a B18C into my car. I just might do it.