PDA

View Full Version : Weird jump on tach



1988starter
10-16-2002, 08:36 PM
Ok Here is the deal I have been having this weird thing happening with my car sometimes when i HIT 3000 the tach will jump from 3000 to 3100 and sometimes when I accelerate up hill I have the same problem and the car will stutter.

I have got new plugs a coil ignition box checked and recheck my gap changed my wires played with my timing new altertnator (helped a bit) and new fuel filter(helped a bit) Right now I have an ajustiable fuel regulator with a gauge attached to it so I can make sure I am getting the right pressure. Ialso have changed my cap and rotor any other sugestions I might try.

1988starter
10-16-2002, 08:41 PM
Another question does anybody know the correct fuel pressure I should set my regulator I think it is 35 PSI but I am not sure

anchovies
10-16-2002, 09:08 PM
stock fuel pressure 33-39psi
throw some fuel injector cleaners in there, see if that helps. Get expensive stuff like Gunk

1988starter
10-17-2002, 07:51 AM
Yea I have tryed that I will see whats up tonight my car goes in the shop for a tranny rebuild engine mount check rotate and balance and powersteering line replacement so I will see whats up.

toastyghost
10-17-2002, 01:05 PM
If you find out what it is, PM/email me or post on this thread or something because it sounds like what mine has been doing. I was convinced it was the carburetor dying but since yours is LX-i and you're having similar troubles I'm not so sure it's a carb-specific thing. My mechanic doesn't really specialize in imported vehicles so when he couldn't figure out what was wrong he referred me to this local Precision Imports shop. I have an appointment with them tomorrow morning so hopefully they'll know what it is and not try to gouge me for the cash!! :P

chiller670
12-23-2003, 07:35 PM
so did anyone ever find out whats wrong???

SrvZro
12-23-2003, 09:10 PM
I was getting a weird jumping on my tach. Thats when I changed out the distributer, rotor, and pcv. Both my distributor and pcv were crap. But once i put the new ones in, the werid jumping went away.

1988starter
12-24-2003, 10:35 AM
so did anyone ever find out whats wrong???

It was the distributer 200 bones later at autozone I had a new one lifetime warenty

AccordEpicenter
12-24-2003, 10:52 AM
just get one at a yard.. this problem has been discussed many many many many times