Front Lower Arm Bushings (group buy)

[chedda_jsauto]

I finally have started to make bushings for the prelude/accord. I apologize it has taken so darn long. So the first official set will be the Front Lower Arm Bushings, or FLABs as I call them. I have 4 sets called for out of the first 5 I'm making from the guys from Preludepower.com.

http://i3.photobucket.com/albums/y64/cheddaj/FLAB.jpg

These bushings are the ones that the Lower Arm rotates on, it connects to a subframe mount. The sets will be made out of UHMW poly, a very durable plastic, a material I use for all my bushings. Its quite allot stiffer than rubber, wears way slower, and is self lubricating.

The total price (both sides including new sleeves) is $50 shipped.

The photos below show how I built the bushings and what it looks like when its all installed. I can explain how to install them if anyone is really interested.

http://i3.photobucket.com/albums/y64/cheddaj/FRABushing.jpg

http://i3.photobucket.com/albums/y64/cheddaj/FRABushing4.jpg

http://i3.photobucket.com/albums/y64/cheddaj/FRAInstalled2.jpg

http://i3.photobucket.com/albums/y64/cheddaj/FRAInstalled.jpg


And the group buy list goes like this:

gfrg88
knifemind *paid*
86km
chughart2010
fmn716

And the second group buy goes like this:

Hash_man_Se_i
DoughludeR (PP)


Note: The materials have been shipped, now awaiting arrival for the first 5 sets. The second group buy has started.

[chedda_jsauto]

I also want to note the interchangeability.

ACCORD 2D '88-89
ACCORD 3D/4D '82-83
ACCORD 3D/4D '84-85
ACCORD 3D/4D '86-89
CIVIC 3D/5D '80-83
CIVIC 4D '81-83
PRELUDE '79-82
PRELUDE '83-87

[chedda_jsauto]

First 5 sets are called for. Thanks guys.

[gfrg88]

weeee I'm first!!!! :D


Free bump :P

[Hash_man_Se_i]

I'll take a set.

[chedda_jsauto]

I'm sold out! I can put you down for the second run.

[gfrg88]

I'm only taking one set since we were able to get more than 5..

[chedda_jsauto]

Yeah I just forgot to update, thank you sir.

[Hash_man_Se_i]

yea, chedda... put me down for the second run. If needed I will take more then one set to make the run happen.

Thanks

[chedda_jsauto]

Thanks sir. I will start a second list, there are a few people now. Once I get the first set done, Im going to use the proceeds to start to get more materials to do another set and then rear radius arms (prelude). Once those are done, Il get the rest of the front LCA and UCA done.

[chedda_jsauto]

Ok guys, the first 5 sets are ready to go. For those of you that are in the first group buy, please visit

http://cheddasauto.webs.com/apps/webstore/products/show/3046234

Here are some photos of the kits:

http://i3.photobucket.com/albums/y64/cheddaj/IMAG0204.jpg

http://i3.photobucket.com/albums/y64/cheddaj/IMAG0201.jpg

Just a heads up, I am moving onto the Upper Control Arm bushings very soon.