PDA

View Full Version : Cut springs on 2gee -- let's science this



huntz0r
05-07-2012, 11:21 PM
I'm thinking of doing a mild cut along with Koni Special inserts from classicgarage.com.

The goal is modest, just a bit more stiffness and bringing the wheel gap down to sane amounts. I don't want the springs to be too hard for the dampers and destroy the ride and handling.

Near as I can tell I may want 1-1.5 coils off to accomplish this. I'm also not sure about cutting the same or different amount of coil between front/rear to make the car sit evenly.

huntz0r
05-10-2012, 01:45 PM
I'm gonna have to do the R&D on this, aren't I...

Christofur
05-10-2012, 07:19 PM
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/469190_3119284134761_1044254024_32914355_157079142 5_o.jpg


Heres 1 and a half off the front and back. i have been driving like this daily for about 4 months and the damper is still fine. just a little bouncy cause im still using stock struts.

huntz0r
05-10-2012, 08:42 PM
Yeah buddy! That's exactly what I'm looking for.