B-series intake question

[import racer]

Finally got a b-series intake,really dirty so started to clean it up today.Gonna file down casting marks and what not and paint it.I noticed two things on the front and want to know do I need them,one looks like a idle control and the other to the right has a big hose that connects to the back.Do I need these or not.

[Rendon LX-i]

you dont need the iacv. you need the fast idle vavle that controls your idle on are accords. Theres no source that controls air flow like obd1 does. unless you just block it off. idk how other members do it

[import racer]

Well it off a 93 teg,just wondering what those two things are for in front .one is connect to the TB ,vacuum operated with rod.The other thing is to the right of that.

[import racer]

http://i188.photobucket.com/albums/z304/importracer1987/bintake.jpgCircled in blue,I borrowed the pic from here.

[AccordB20A]

block it all up. not needed :)

[import racer]

Thanks man,that all I wanted to know.When I lined up the gasket I noticed I only have to drill the 2 outside holes the middle one matched the gasket.

[import racer]

Well while cutting off the top ears with the holes not need I cut off a piece of the lip around where the injector goes.I put it back on with j b weld,hopefully it holds or I'm lookin for another manifold.