PDA

View Full Version : slammed safety



88lxi-shortram
09-26-2012, 06:39 PM
Ok so i went waayyyyyy lower and now im satisfiedwith my stance . but ive run into a problem, my trany and oil pan are to close to the ground for comfort. i wanted to know if anyone has raised an engine up for more clearance. i have ideas but would value some thoughts.

RAZR
09-26-2012, 06:48 PM
Just make a skid plate.

88lxi-shortram
09-26-2012, 07:19 PM
I would, but the only problem i see with that is that even though the skid plate will absorb most of the impact it might still damage something. idk if u have me on fb but i posted pics last night of how close i am. im thinking if a raise the motor up a little and make a skid plate i would be much more protected.

MessyHonda
09-26-2012, 07:21 PM
or maybe custom oil pan?

88lxi-shortram
09-26-2012, 07:34 PM
Lol i dont even know where to begin looking for a shop thatll do that.

88lxi-shortram
09-26-2012, 07:35 PM
And that still wont helo my tranny out either

Vanilla Sky
09-26-2012, 07:37 PM
Skid plates. Seriously, it's your only reasonable option. Build one you'd be comfortable with on a rock crawler. It's what the mini truck guys do. It's the only reason some of them still have oil pans. When you're cruising low enough to pop reflectors off the ground, a manhole cover that sticks up 2-3 inches will take just about anything out.

2ndGenGuy
09-27-2012, 09:19 AM
Where are the pics? On Failbook? Lame.

RAZR
09-27-2012, 09:24 AM
Where are the pics? On Failbook? Lame.

Their not on the 3geez facebook page.

@88LXI post pics either here or on the facebook group so we can see.

88lxi-shortram
09-27-2012, 10:13 AM
ill be sure to post them up when i get home. theyre on my computer and im at work.

POS carb
09-27-2012, 12:42 PM
It is easy to shim the front and rear mount, however the side mount would be difficult to modify because of it's shape and the way it mounts

2oodoor
09-27-2012, 02:08 PM
They make 1/4 plate aluminum skid plates for Fwd impala cop cars, may find one in the jy off a 2005 ish :D ahh so doubled up street signs would be similar plate hmmm
Gwinnet county had a shitpile of those impalas so you may get lucky and find one around there shortram:D you need a metal break to bend it to fit poassibly.

AZmike
09-27-2012, 08:49 PM
My suggestion is to raise the car if you're concerned, but I always favor function over appearance.

MessyHonda
09-28-2012, 05:27 AM
My suggestion is to raise the car if you're concerned, but I always favor function over appearance.

k sport also offers a air ride suspension but its 2790...but that would look cool and still serve as a function

Vanilla Sky
09-28-2012, 06:24 AM
There are other companies that make them for Civics and newer Accords. Since we're talking about air over strut, you really don't need to be concerned with lenght, as long as they are short enough to lay frame. You might need to tuck your exhaust and add a fuel tank skid plate, too.

2oodoor
09-28-2012, 08:52 AM
I so wanted air suspension but too much $$$$$ so theres got to be some good used ones out there somewhere !!! I agree, a lot of air struts from other apps could be made to work for ours.
The pinch fork added length may limit that to mostly Hondas though.

Vanilla Sky
09-28-2012, 09:44 AM
As long as it fits properly, it doesn't matter. IIRC, the combo is EF Civic in the front, CB Accord in the rear. Look in Lowrider and Mini Truckin' for companies that make air struts. Slam Specialties come to mind, but I recall issues with some of their bags back in the day.

gfrg88
09-28-2012, 12:16 PM
Pics?

obdriver6
11-03-2012, 09:46 PM
^ x2

2drSE-i
11-12-2012, 07:03 PM
My suggestion is to raise the car if you're concerned, but I always favor function over appearance.

Wheres the damn like button, this is 2012!!

mushroom_toy
11-13-2012, 04:08 PM
Posted twice...look below. V

mushroom_toy
11-13-2012, 04:09 PM
Mine may be lower......and yes my engine is raised about 2".

Things youll run into....sway bar completely binds shift linkage up...and youll need to notch the body for the axles.

Edit: also youll need to raise the rear of the hood...cut out some of the under hood support...stiffen the mounts so your motors not torquing into the hood...etc.

2drSE-i
11-13-2012, 04:12 PM
Wheres the damn like button, this is 2012!!


lmao....the next day there is a like button. Thanks Joe!

DaveE
01-01-2013, 07:35 AM
It's what the small vehicle people do. It's the only purpose some of them still have oil dishes. When you're visiting low enough to pop reflectors off the floor, a manhole protect that stays up 2-3 inches wide will take just about anything out.

Buzz App (http://www.buzzapplications.com) | Buzz Apps (http://www.buzzapplications.com) | Twilio Services (http://www.twilioservices.com) | SMS Marketing (http://codecanyon.net/item/wordpress-sms-marketing-plugin/12576276) | Wordpress SMS Plugin (http://codecanyon.net/item/wordpress-sms-marketing-plugin/12576276) | SMS Plugin (http://codecanyon.net/item/wordpress-sms-marketing-plugin/12576276) | WP SMS Plugin (http://codecanyon.net/item/wordpress-sms-marketing-plugin/12576276) | Privacy Pro (https://play.google.com/store/apps/details?id=com.autoprivacy.fsl.ranksol&hl=en) | Wifi Based App (https://play.google.com/store/apps/details?id=com.autoprivacy.fsl.ranksol&hl=en) | Privacy Pro App (https://play.google.com/store/apps/details?id=com.autoprivacy.fsl.ranksol&hl=en)