PDA

View Full Version : Battery and Trunk



khoad0
10-27-2002, 09:49 PM
i was wondering if anyone would help me on a how to move the battery to the trunk. Im planning on getting CAI but the battery is in the way. please help.....

anchovies
10-27-2002, 11:21 PM
Get a battery relocation kit.
Sorry couldn't find a MAJOR car site selling it right now.

GDGuy11B
10-28-2002, 08:11 AM
here's the one from Summit Racing. Justin(Omega3001x) used it and it does the job. I wouldn't suggest going out and buying the individual parts. i tried that and it cost much more than the kit.

http://store.summitracing.com/partdetail.asp?part=680


Micah

RobT5580
10-28-2002, 09:08 AM
Yeah that kit is fine for that and pretty cheap since they come with the tray and cable. I ran the positive cable through the passenger side finder and into the cabin (there is a plug there when you take off the fender). plus i put it in wire loom to protect it even more to be safe.

smufguy
10-28-2002, 03:38 PM
yep. Get a high amp cable connector that would fix on ur firewall to prevent the cable from ur trunk and the existing cable from ur enginebay wont be moving around. also it makes a good connection. Ground the enginebay and trunk wires good.

1987HondaAccord
12-19-2002, 04:38 PM
Since i have to drill a hole in the firewall what type of drill is good?
thanks for your help

RobT5580
12-19-2002, 04:55 PM
You dont have to drill a hole if you take off the fender (passenger side) there is a gromet that goes into the cabin there. That was the best place i found plus i wanted to make sure the cable was secure and protected. If you drill a hole be very care full where you drill and make sure to use a protective gromet to protect the wire. Drilling is gonna be hard considering your limited on space to get a drill into.

ACCORD EX
12-20-2002, 01:08 AM
i am with rob don't drill on the firwall ! you can build up rust later !

MIKE