3geez Seattle 2013 - 4/20 10:30am - UPDATE - This is going to be HUGE!

[2ndGenGuy]

Hey everybody,

Just wanted to get some more word out about the Seattle meet! We've got 33 people confirmed on Facebook so far to come to the meet!

We've got a dyno rented out for the whole day! And after the dyno session, we're going to hit up some go karts, and afterwards we'll probably drive to go eat some DICKS. It's going to be freaking awesome!

We will be meeting at 10:30am on April 20 at Intec Racing! We have a full day rental scheduled on the dyno! Dyno time will be on a first pay, first serve basis. Dyno sessions will be $60, and if we get enough people signed up for the dyno, the cost will go down.

When the dyno sessions are done, we will be meeting up at SyKart in Tukwila to see who the best racer is!

Intec Racing is located at 25911 104th Ave SE, Kent, WA 98030 - intecracing.com (http://store.intecracing.com/)

Sykart is located at 17450 W Valley Hwy, Tukwila, WA 98188 - Home - SyKart Indoor Racing Center (http://sykart.com/)

And after Karting, it's time for some DICKS delicious hamburgers! The official burger joint of 3geez.

Don't miss out on this awesomeness!

[Rendon LX-i]

like always ill be first braaahhhahahah lol. cant wait to see dyno results lol

[mykwikcoupe]

So my daughters first swim meet is this day. I'm trying to talk my way out.

I was working on the car today trying to figure out why it feels like the thing lurches from side to side when driving. Needless to say I wasn't under it but it did fall off the jacks I had it on. I have 2 ton jacks that have a 8x8 base. The base of one twisted and the car slowly leaned to the left. I was able to press the car to the right and stop it for a second but I'm not as strong as I used to be and let off it slowly so it hit the ground pretty mildly. I had just finished putting the intermediate shaft back in. Put the wheels back on and it started getting real tight where I was working.

[Rendon LX-i]

Bump

[FederalSecurity]

I just wanted to put a couple of things out there before we all show up to the Seattle 2013 meet. For anybody who has anything "3rd gen" Accord-related and is planning to show up at the meet, I'm looking for a 1988 Accord Coupe Owner's Manual and 1988 Warranties booklet.

They look something like this...
http://www.3geez.com/forum/members/federalsecurity-albums-1988-lx-i-picture5031-1988-accord-coupe-owners-manual-warranties-booklet.jpg

I'm willing to buy or trade a couple of things that I've gotten ahold of.

I've got a couple of 1987 Accord Owner's Manuals and a couple of 1987 Warranties booklets. One is a hatchback Owner's Manual and the other is a sedan Owner's Manual.
http://www.3geez.com/forum/members/federalsecurity-albums-1988-lx-i-picture5032-1987-accord-owners-manuals-warranties-booklets.jpg

I've also got a pair of Silky Ivory 6 x 9 speaker enclosures to trade for the Coupe Owner's Manual or something else.
http://www.3geez.com/forum/members/federalsecurity-albums-1988-lx-i-picture5033-silky-ivory-6x9-speaker-enclosures.jpg

Even if none of these items interest anyone with a spare Coupe Owner's manual and Warranties booklet, just give me a price and I'll probably throw money at you.

[charliekuney]

I find coupe owners manuals all the time. I might even have some laying around. If I find one at a yard I'll grab it and ship it.

[FederalSecurity]

I find coupe owners manuals all the time. I might even have some laying around. If I find one at a yard I'll grab it and ship it.

Much appreciated, sir. Just give me a price.

[2ndGenGuy]

I'm might bring a bunch of parts that I am selling... I should probably get pics of everything I'll have for sale... Might be an excellent time.

[FederalSecurity]

I'm might bring a bunch of parts that I am selling... I should probably get pics of everything I'll have for sale... Might be an excellent time.

If there are more than thirty of us showing up in Seattle in April, it might be worth planning a "3geez Swap Meet" where all of us could bring some spare parts that we have to sell or trade to each other. Thirty of us each bringing a few parts would add up to a large pile of parts to look through for all of us.

On that note...I'm wondering how feasible it would be to set aside a day for some sort of group junkyard run at a salvage yard like the place (http://www.3geez.com/forum/classic-honda-discussion/78643-found-motherload-1g-2g-3g-accords-wrecking-yard.html) that 2ndGenGuy found during our meets.

[Xybris]

I miss this shit. Can't find anything 3G related whatsoever in JDM land...

[dieselgus]

Dang it. Ended up getting booked for a bunch of work this coming weekend putting up a couple of these: Overview | SL100 | Mobile Stages | Stageline (http://www.stageline.com/en/main_nav/produits/tous-les-modeles/sl100/montage/) for a large event (actually my other job. I literally get to play with Transformers. For real.) so popping down for the meet is a no go.

[Legend_master]

lol ya'll are gonna eat DICKS!

[FederalSecurity]

I miss this shit. Can't find anything 3G related whatsoever in JDM land...

Nothing at all over there? Have you been through any of the junkyards? Anyhow...if and when you come back, I'm sure you'll find a 3geez group near you.

[FederalSecurity]

Dang it. Ended up getting booked for a bunch of work this coming weekend putting up a couple of these: Overview | SL100 | Mobile Stages | Stageline (http://www.stageline.com/en/main_nav/produits/tous-les-modeles/sl100/montage/) for a large event (actually my other job. I literally get to play with Transformers. For real.) so popping down for the meet is a no go.

I know what you mean. Sometimes answering your phone on your days off isn't such a good thing either. Where I work we're always short on people, but the 20th and 21st for me are set in stone. The Feds have what they call Annual Leave, which is basically mandatory paid vacation time that we have to take no matter what.

[FederalSecurity]

lol ya'll are gonna eat DICKS!

...oh, what the hell...I'll take the bait. I'm going to show y'all how we eat DICK'S in Spokane! Yeyeah!

:eatarrow: :barf:

[FederalSecurity]

The things that I'm bringing for swap or sale are:

* Silky Ivory 6 x 9 speaker enclosures
* Set of four factory mudflaps
* Front "cassette tape" storage console
* Two steering wheel Honda emblems
* Owner's Manual and Warranties Booklet for a 1987 Sedan
* Owner's Manual and Warranties Booklet for a 1987 Hatchback
* Owner's Manual and Warranties Booklet for a 1989 Sedan

[charliekuney]

[QUOTE=FederalOn that note...I'm wondering how feasible it would be to set aside a day for some sort of group junkyard run at a salvage yard like the place (http://www.3geez.com/forum/classic-honda-discussion/78643-found-motherload-1g-2g-3g-accords-wrecking-yard.html) that 2ndGenGuy found during our meets.[/QUOTE]

It's only a forty minute drive from Seattle...

[Rendon LX-i]

couple more days

[jbabb]

dibs on those mud flaps

[2ndGenGuy]

Lucky for you I have 2 sets. Rendon gets the other set. :)

[charliekuney]

dibs on those mud flaps

Before you even consider, make sure they are for the correct body style.