charliefowle03
07-06-2013, 01:57 PM
I have been going down on these brakes for a little time now. I replaced the booster and master cylinder and then bled the brakes. I have recently tinkered with the pushrod length on the booster and have tried to get it back to factory distance.
The problem: Brake pedal is inconsistent while applying. Some times stiff and other times normal. Now it is spongy right when I start it up then slowly returns to normal. after replacing these i noticed my calipers was showing asyptoms of seizing up. The rotor on the drivrr side is glazed and really burnt . could this be a p shrod length problem
https://www.youtube.com/watch?v=HMqaR9JKGyc&feature=youtube_gdata_player
The problem: Brake pedal is inconsistent while applying. Some times stiff and other times normal. Now it is spongy right when I start it up then slowly returns to normal. after replacing these i noticed my calipers was showing asyptoms of seizing up. The rotor on the drivrr side is glazed and really burnt . could this be a p shrod length problem
https://www.youtube.com/watch?v=HMqaR9JKGyc&feature=youtube_gdata_player