PDA

View Full Version : b20a axel



88LXI
11-07-2002, 06:55 PM
:banghead: which axel do i use on the drivers side when doing a b20a swap?? :stick:

88LXI
11-07-2002, 07:00 PM
before people correct me... AXLE :werd:

RCracer
11-08-2002, 03:44 PM
When you say drivers side I take it you mean where the long drive shaft would normally be. (its passenger side in the UK:D )
The B20a has a intermediate shaft (that bolts to the engine) and both driveshafts are simular in length. Not sure how much differance there is between the O/S and N/S shafts.
I will measure them tomorrow (if you need the measurement)

MoonScryer
11-08-2002, 04:48 PM
We have been told the second gen Integra axles work. Openloop Motorsports should be along to tell you, hopefully.

YK86
11-08-2002, 06:00 PM
You can use the original axles. From what I hear, the intermediate axle doesn't make any difference with torque steer. That's a good thing though since you don't have to get a replacement from Japan or some other overseas place if something happens to it.

88LXI
11-08-2002, 08:37 PM
:deal: i heard the integra one works but i just wanted to make sure that was the correct info... i think that it would be better to use the intermediate shaft axle vs. the long stock one just because thats how its supposed to be, right? anyway thanx for the posts guys... any more info would be appreciated :wave: