b16

[ninja2571]

will this engine i found on jdmhondaparts work

B16A Engine - Cable Type
89-91/nonOBD
• Also known as the '1st gen' B16A.
• Designed for the 88-91/EF civic/crx & 90-93 DA integra chassis.

and where do i get the motormounts from

[netfreak]

Yes. You need the place racing mounts which sell for $450 usd some places. You also need custom axles and wire harness which are also available at place racing.

[3rd GEN]

yup.. this engine is most common and one of the easiest to swap into our cars..
also has lots of aftermarket support :)

[OldSchoolSwap]

Go to my site and read everything possible. If you need pricing on the mount kit, talk to me, i'll get you the best price in town.

[Kevin]

Has anyone put a B16b into a 3rd gen?? Its the moter out of a late 90s civic type R moter with 185 Hp @ 8200 Rpm @ the crank!!It is a sick moter!!!

[quagmire]

Only difference between the b16b and the b16a is the cams and higher compression. Since you'd have to convert to a hydro trans, the b16a1 with the cable trans is a much better idea. If you want CTR like power, simply put in CTR pistons and cams. That would be far more economical, seeing as how the b16a1 is about $1150 and the b16b is $4000 for the whole "changeover" package.

Prices are from: http://www.hmotorsonline.com/shop/

[Kevin]

I love that power though!! If could i drop an all moter H22