NastyNancy
11-07-2013, 11:08 PM
Ok so here's a quick recap from my newbie intro thread:
I'm Ethan, 18 years of age. College, job at America's Tire and Abby are my life. Bought her bone stockkk for $1800, 184K and counting (runs like a champ).
http://i976.photobucket.com/albums/ae249/ethanmiller55/IMG_9531_zps8cc7b586.jpg
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0226_zpsc78170d0.jpg
Boredom found me so I started explore, clean and take things apart.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0231_zps2cdacff9.jpg
My uncle is a long time Honda tech so he helped me do a tune up which included: timing belt and other belts, water pump, thermostat, crank and cam seals, valve cover gasket, plugs/wires and filters etc etc.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0294_zps659c6758.jpg
My intent was to lower it when I bought so that time came. Stripping the suspension was good times.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0322_zpscc5a3138.jpg
Ground Controls/Tokicos and custom 3 inch extended top hats all the way around.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0305_zps8d5b2af2.jpg
Dad and I cut open the strut towers to accommodate the extended top hats. (Pass is cut and driver is not).
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0370_zps61f058ba.jpg
Ground Controls turned all the way down are insane. The ucas are barely off the inner fenders and the mud flaps are on the ground. I drove it around the block this way...didn't get very far.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0381_zps96b5bf31.jpg
So we raised the front an inch and I've been dailying it since! Looked forever on Craigslist for new wheels and I finally found some 2 piece 16s that fit nicely I must say.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0431_zpscd1ed711.jpg
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0476_zpsc72f289e.jpg
All I have to say is that I love this freaking car. Got it aligned recently, the toe came back to zero but I've got -4 camber up front and -3 out back, good thing I work at a tire place. Cruise and the windshield washer have been deleted due to lack of interest.
I've got a few more things in the process so I'll keep you guys posted, thanks for looking!
I'm Ethan, 18 years of age. College, job at America's Tire and Abby are my life. Bought her bone stockkk for $1800, 184K and counting (runs like a champ).
http://i976.photobucket.com/albums/ae249/ethanmiller55/IMG_9531_zps8cc7b586.jpg
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0226_zpsc78170d0.jpg
Boredom found me so I started explore, clean and take things apart.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0231_zps2cdacff9.jpg
My uncle is a long time Honda tech so he helped me do a tune up which included: timing belt and other belts, water pump, thermostat, crank and cam seals, valve cover gasket, plugs/wires and filters etc etc.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0294_zps659c6758.jpg
My intent was to lower it when I bought so that time came. Stripping the suspension was good times.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0322_zpscc5a3138.jpg
Ground Controls/Tokicos and custom 3 inch extended top hats all the way around.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0305_zps8d5b2af2.jpg
Dad and I cut open the strut towers to accommodate the extended top hats. (Pass is cut and driver is not).
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0370_zps61f058ba.jpg
Ground Controls turned all the way down are insane. The ucas are barely off the inner fenders and the mud flaps are on the ground. I drove it around the block this way...didn't get very far.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0381_zps96b5bf31.jpg
So we raised the front an inch and I've been dailying it since! Looked forever on Craigslist for new wheels and I finally found some 2 piece 16s that fit nicely I must say.
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0431_zpscd1ed711.jpg
http://i976.photobucket.com/albums/ae249/ethanmiller55/DSC_0476_zpsc72f289e.jpg
All I have to say is that I love this freaking car. Got it aligned recently, the toe came back to zero but I've got -4 camber up front and -3 out back, good thing I work at a tire place. Cruise and the windshield washer have been deleted due to lack of interest.
I've got a few more things in the process so I'll keep you guys posted, thanks for looking!