PDA

View Full Version : Speedometer clip !


ACCORD EX
11-16-2002, 03:57 AM
does any body have a pic of a speedmeter clip where it connects to the tranny !

thanx !

MIKE
smufguy
11-16-2002, 11:50 AM
u mean the clip that connects the speedo cable? its amazing u got questions :D
ACCORD EX
11-17-2002, 03:09 AM
yeah, its probably the speedo cable is loose in the tranny. check to see if u see a 'C' clip once u move the rubber gourmet from it. If its fixed and still bounces around. Then u need to replace the speed sensor and its not that hard to get one from the junk and put it in u car.




you have posted this in another thread !
that's the clip i mean !
i need the pic of the clip so i can get a similar one !
because when i removed the rubber i realized that i don't have a clip ! and my speedmeter bounces !

MIKE
BoredRec
11-17-2002, 11:22 AM
...^
..( )
.O O

Eh, looks something like that
GreenMachine
11-17-2002, 11:50 PM
thats a wrecker item - thats what i'd do
ACCORD EX
11-18-2002, 03:15 AM
yeah but i need a picture to know what it looks like !
please guys , can someone shoot it even if in place !

MIKE
carotman
11-18-2002, 07:50 AM
A bouncing speedo isn't related to the clip. It's because you need a new speedo cable.
ACCORD EX
11-18-2002, 09:21 AM
may be so ! but when i was checkin my cable at the tranny it's very loose i just pulled and it came right out !


so please guys !

MIKE
BoredRec
11-18-2002, 06:07 PM
Do they have Honda dealers in Egypt? I'd say just go buy one, they're only like a buck, if that. Sorry for no pics, don't have one handy, and I sure as hell don't wanna pull it off my car.
ACCORD EX
11-19-2002, 03:58 AM
they don't work here with part numbers , you have to bring them the old part !
and i am not asking to tear your car a part but raise the boot on the end a little bit and shoot it ! pleeeeeease !
or is it available @ majestic honda ??

MIKE
ACCORD EX
11-20-2002, 04:39 AM
here is a pic can you tell me the number of that clip on the pic !

http://www.slhondaparts.com/images/PCI/13SE00/005/8.jpg

MIKE
carotman
11-20-2002, 04:54 AM
The part number is not there

You know what? you should brin them a GM part and ask for this!

What kind of dealership is that! They should also work with part numbers. did you file a complaint to Honda of Egypt?

The part you'Re looking for is the number 8 on that link

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Accord&catcgry2=1988&catcgry3=4DR+LXI&catcgry4=KA5MT&catcgry5=P.S.+PUMP-SPEED+SENSOR

They will rip you out of 87 cents.... :D
Immeraufdemhund
11-20-2002, 06:44 AM
it would seem like 9 to me.
carotman
11-20-2002, 07:02 AM
errrrrr............. maybe......... NOT :D

I may be french canadian, but I do know that O-rings aren't used to retain cables
ACCORD EX
11-20-2002, 08:55 AM
Originally posted by carotman
What kind of dealership is that! They should also work with part numbers. did you file a complaint to Honda of Egypt?



hi carotman ! where 've you been ! :)

anyway HONDA egypt sucks big time !i think i'll file a complain to HONDA JAPAN ! :D

thanx carotman for the link !
but how to install that clip ?

should it be under the boot or over it ! ?

sorry to bother you with so many question ! :)

thanx again !

MIKE
BoredRec
11-20-2002, 05:59 PM
Under the boot, I never bother pulling the boot all the way down after that, it's just a nuisance.
ACCORD EX
11-20-2002, 10:54 PM
i 'll try to get some photos to understand hwo can i attach it !

is it in Paul's online service manaul ! ?


MIKE
accord_lx_86
11-21-2002, 03:05 AM
i can take a pic of the clip...but i cant post on the site...email me and ill email back [email protected]
ACCORD EX
11-22-2002, 01:52 PM
thanx man !
i'll sure will !

MIKE
markmdz89hatch
11-22-2002, 02:06 PM
I found what ur looking for...

can you spare $.87?

here ya go (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Accord&catcgry2=1989&catcgry3=2DR+DX&catcgry4=KA5MT&catcgry5=P.S.+PUMP-SPEED+SENSOR)

...and a pic... it's #8.
markmdz89hatch
11-22-2002, 02:07 PM
I should prol'ly get one too...

...i have'nt had one in since I did my 5spd swap months ago... speedo's fine tho...lol....anyway..
ACCORD EX
11-22-2002, 02:10 PM
SHIT !! i forgot to mention !
MY speedo cable popped out of the tranny ! i put it on again and it keeps popping out ! even the boot doesn't hold it in place !

heeeeeeeeeeeeeelp ! :( :crying:

MIKE
markmdz89hatch
11-22-2002, 02:13 PM
ok so you better get a #1, and #8 now.

along with a #5 (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Accord&catcgry2=1989&catcgry3=2DR+DX&catcgry4=KA5MT&catcgry5=SPEEDOMETER-CLOCK)

That should do the trick!
ACCORD EX
11-23-2002, 09:02 AM
accord_lx_86 just mailed me the pic of the clip ! but how the hell should i put it on !
i looked at the wire and here is a pic of it !

# 1 is the wire it self
# 2 is a groove
# 3 is a rubber casing !
the drawing of the clip is above !

should i just put it around the groove and put it 2 ends on each other and then insert it with the clip into the hole ! i am afraid it could fall in !

MIKE
ACCORD EX
11-23-2002, 09:02 AM
accord_lx_86 just mailed me the pic of the clip ! but how the hell should i put it on !
i looked at the wire and here is a pic of it !

http://members.fortunecity.com/accordex87/speedoclip2.jpg

# 1 is the wire it self
# 2 is a groove
# 3 is a rubber casing !
the drawing of the clip is above !

should i just put it around the groove and put it 2 ends on each other and then insert it with the clip into the hole ! i am afraid it could fall in !

MIKE
markmdz89hatch
11-23-2002, 09:11 AM
the clip lays perpedicular to the cable.... ...put the cable in, slide up the rubber cover. Look at the top of the speed sensor and where the cable goes into it. You'll notice a small "cut" in the neck of it. Just slide that clip around that neck and into that little "cut". You'll notice that the clip has one side that's a little flatter then the other. That's the side that lays into that cut. If the cable is in all the way, that cut will line perfectly up with teh groove in the cable, hence the reason for the clip, and it's ability to hold the cable put. To make sure that you've got it in right, give the cable a little tug.. If it comes out, try again, if it's "stuck" then by gollie you've got it!...

>>>I'll see if I can break out some paint skills and draw something up for you in a few....
markmdz89hatch
11-23-2002, 09:47 AM
BAM... ...m/s paint at work.... ...any Q's feel free to ask...
ACCORD EX
11-25-2002, 06:18 AM
thanx a lot Mark i fixed today !
BTW nice drawing !

MIKE
markmdz89hatch
11-25-2002, 06:31 AM
anytime.. ...anything else you need me to whip up in paint for ya'?:smokin: LOL..