removing tailight

[socal3rdgen]

im going to the junk yard today to remove a tailight. does anyone know what i should brign to remove it. rember im at a junkyard no electricy. so a heat gun is out of the qeustion.

[socal3rdgen]

anyone :sadwave:

[1989se-i]

wrenches

[89LXiCoupe]

Bring your toolbox with you. You'll never know what you're gonna need.

[socal3rdgen]

i thought it was glued in there

[DBMaster]

All right, here you go if it's no too late. You will need an 8mm deep socket and small (1/4") ratchet handle. That's pretty much it. On the junk car you can just pull the trunk liner because you won't be worried about breaking the clips. When you install the tailight on your car you will want to be more careful to remove the screws and clips so you can put the trunk liner back as it was.

I just did this on my car last weekend so it is fresh in my mind.

[socal3rdgen]

thanks dude im leaving right now. just in time. i owe ya one.