ARP head Studs

[Tdurr]

For future reference, this is the arp head studs part number that works in 3geez/a20: 218-4703
its for a mazda 2.0l 98-02.

http://i28.photobucket.com/albums/c220/TheDarkDarkRacer/20140426_19270_edit_1398554938513.jpg (http://s28.photobucket.com/user/TheDarkDarkRacer/media/20140426_19270_edit_1398554938513.jpg.html)


http://i28.photobucket.com/albums/c220/TheDarkDarkRacer/20131113_182227.jpg (http://s28.photobucket.com/user/TheDarkDarkRacer/media/20131113_182227.jpg.html)

[niles]

Do the intake and exhaust studs in the kit also fit our heads?

Update #1: I received my studs today. It is ONLY the head studs. Some websites use a stock photo that makes it look like its a complete kit with intake and exhaust studs too.

Update #2: Figured I would mention in this thread (can be found elsewhere) the ARP head studs come with 12-Point 1/2" nuts. You will need a matching socket.

[ShiRen]

I would like to add: Torque the studs to ARPs specs. Do not use the factory spec. There is no downside to doing this and will probably remedy the fragile head gasket issues old hondas are plagued with, up to the point of running over a bar of boost