Page 57 of 57 FirstFirst ... 7475354555657
Results 1,401 to 1,410 of 1410

Thread: Have a quick question? Ask it here!

  1. #1401
    Have a quick question? Ask it here!
    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX / 18 Civic Type R
    Location
    MO
    Posts
    453

    Re: Have a quick question? Ask it here!

    RTV is not a good gasket for an intake, just saying. Assuming the "EG6" was not a JDM Si-R, yeah its not very hard to whoop on d16 civics, it takes very little to see ~150hp at the wheels with the A20.
    I would doubt you have any fueling issues unless you havent changed the fuel filters or you have a jumpy tach.
    You can let it idle at whatever you want, probably 700-1000, I find it gets a little annoying at around 1000, but I keep it high enough to turn the AC on



  2. #1402
    DX User
    Join Date
    Nov 2020
    Posts
    1

    Re: Have a quick question? Ask it here!

    Hi guys! Newbie from the UK here! I have a 93 carburated accord which I want to change from vacuum to mechanical secondaries but couldn't find anything for my later model. I saw the thread on the the third gen but didn't know if it was the same. Was looking to eventually boost my f20a2 engine. Any help would be appreciated. Many thanks, Nick.

  3. #1403
    DX User
    Join Date
    Nov 2020
    Posts
    1

    Re: Have a quick question? Ask it here!

    Hey everyone. I'm a newbie here. Still trying to figure out how to use the site but here it goes. I have a 1983 honda accord with 1.8 ek1. I'm doing the timing belt on it. Now what I find interesting is that you have to have your bottom cover on to have your crank pulley on. So my question is will i run into any problems when I go to tighten my crank bolt before the belt tensioner has even been adjusted with the belt on? Or should I tighten crank bolt then slip the belt the over cam? Any input would be appreciated. I plan on using 5th gear and someone on the brake to tighten the crank bolt so some movement is likely.

  4. #1404
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,080

    Re: Have a quick question? Ask it here!

    woops

  5. #1405
    Have a quick question? Ask it here!
    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,174

    Re: Have a quick question? Ask it here!

    Don't you have to tighten the bolt before you can tension the belt? Turning the crank pulley bolt (and not having it loosen) is part of the tensioning procedure.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 220k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  6. #1406
    DX User
    Join Date
    Oct 2020
    Vehicle
    1986 Honda Accord LX
    Location
    Oregon
    Posts
    8

    Re: Have a quick question? Ask it here!

    dumb question but what should my distributor advance be at, keep in mind that I have no vacuum retard hooked up just advanced because weber, weber 32/36 86 accord LX


    Don't do it unless you have a lot of brake clean and time also a flat file.

  7. #1407
    Have a quick question? Ask it here!

    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    4,535

    Re: Have a quick question? Ask it here!

    Advance it till it pings and then back off a notch....since your totally modified it really up to you where you want to run it. All the stock settings go out the window.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    My Acura Type R front brake thread

    https://www.3geez.com/forum/showthrea...r+brake+option

  8. #1408
    Have a quick question? Ask it here!
    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX / 18 Civic Type R
    Location
    MO
    Posts
    453

    Re: Have a quick question? Ask it here!

    I set my static timing to 10-14deg, I haven't heard it ping, but some people have trouble hearing it. You may not rely on the ping unless you have made yourself a det can.

  9. #1409
    DX User
    Join Date
    Jan 2021
    Vehicle
    1986 honda accord
    Location
    2331 w coolidge st
    Posts
    1

    Re: Have a quick question? Ask it here!

    My fans won’t turn on unless my ac is on. Fuses and relay works. I swapped out the sensor on the bottom left of radiator and it still won’t come on. Any help?

  10. #1410
    Have a quick question? Ask it here!
    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,174

    Re: Have a quick question? Ask it here!

    Download the shop manual from the link in my signature, then follow the troubleshooting chart on p.23-6. Let us know what you learn.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 220k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

Similar Threads

  1. Quick question need help quick
    By mushroom_toy in forum 3geez Accords
    Replies: 3
    Last Post: 09-13-2009, 10:59 PM
  2. quick question...
    By Kemikals in forum 3geez Accords
    Replies: 4
    Last Post: 08-24-2007, 01:52 PM
  3. quick question
    By spanky in forum Classic Honda Community Chat
    Replies: 1
    Last Post: 12-21-2005, 05:04 PM
  4. Quick Question
    By Glowin Smurff in forum Classic Honda Community Chat
    Replies: 0
    Last Post: 02-22-2004, 06:16 PM
  5. Just a quick question....
    By Mike D in forum Classic Honda Community Chat
    Replies: 17
    Last Post: 11-26-2002, 04:55 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
VigLink badge