do i need one for my 87 accord? please reply asap, thanks alot guys.
Printable View
do i need one for my 87 accord? please reply asap, thanks alot guys.
Not usually. Pop out the H and remove the nut, then you shoudl be able to wiggle the wheel off.
andy
ya, and it also helps if you have the wheels pointing straight when you take it off. It makes it easier when putting it back on.
Ive pulled out wheels from these cars about 20 times in the past month!!!
Like what PhydeauX, its so easy, I think the nut size is 21mm. They are lock-nuts so to put it back properly, you need to buy one cuz they only work once. But it should work just fine reusing them.
It's 19mm.
Thanks, I knew it was one of those big ones.Quote:
Originally posted by MoonScryer
It's 19mm.
i use a hammer to get it off !much easier ! :D
MIKE
Yes it is a 19mm socket. I had to change my combo switch about 2 months ago. It's really easy to do.
Also make sure the ground is level.
-Mike
ok, thanks guys
