Inputs for my custom tails (pics inside)

http://medlem.jubii.dk/kagemonster/F...ap/tail_01.jpg
http://medlem.jubii.dk/kagemonster/F...ap/tail_02.jpg
http://medlem.jubii.dk/kagemonster/F...ap/tail_03.jpg


Any ideas on what to do from here? I think it looks a little too cheesy when they are all clear because you can see all the stuff on the inside like screws and joints. Maybe you can buy some sort of small red lense and orange lense to put over the bulbs instead of just putting in colored bulbs and then get rid of the big lenses that way?

one thing you may want to think about is using the plastic they use on over head flourescent lights. Its beveled so you wont see through it, but it still gives you the "altezza" look. A couple members have done it already. It doesnt look right IMO though.

Not too shabby............GET HER DONE!!!

Quote:

---

Originally Posted by NXRacer

one thing you may want to think about is using the plastic they use on over head flourescent lights. Its beveled so you wont see through it, but it still gives you the "altezza" look. A couple members have done it already. It doesnt look right IMO though.

---

And just mold it to the inside of the clear lense?

use a heat gun to mold the new plastic in place of the original outside lense.

if you search, there are a few threads on how to do it.

I dont think it would work to well if i removed the outside lense and molded the clear thing on, because i think i have a different housing than you guys. I think i'd like to keed the clear lense and then put something in the inside to cover all the roghness on the alu-plastic backside thingie.

Can you buy some sort of deflector than you can adapt/fit yourself?

how did you make those tail lights? they look nice.

Those are the stock european tail lights. Not like yours. I just took them apart.

so from those pics, you havent modified them at all? the 3 pics look like different lights, also where could i find a pair of euro lights?

get some highly reflective paint and spray it all over in there.

whaaaaaaaaaaaaaat?

Quote:

---

Originally Posted by Dennis

so from those pics, you havent modified them at all? the 3 pics look like different lights, also where could i find a pair of euro lights?

---

Yes. Normally the orange and red reflector lense things, are in the housing together. I just took a picture of the 3 different options, without having the orange and red lense inserted at the same time.. I dont know where you can find the lights in the US. They where only on the european accords. Maybe some japanese accords too, i dont know. You would have to get them from europe.

Quote:

---

Originally Posted by 88 Accord DX

get some highly reflective paint and spray it all over in there.

---

Well the problem is that I want it to look flush inside first. As you can see on the pictures theres a lot of unevenness back there.

If you can find a way to make the inside more even so you can't see all the stuff you don't want you will have a nice set of clears. :D

Exactly. Just gotta find that way :)

Hey thegreatdane is it possible you get an extra set like from a salvage yard or something over there?. I'll love to have some of those for my Hoop Ride :D. You should just get the colored bulbs and try put florescent light covering on the inside of the clear.

just spray em all red.. transparent of course... the cops wont know the difference if there is a reflector... they would look pretty hot

Travis

i thin k it would look pretty phat if u just tinted them chrome or platinum.

hmm, just add more screws to the inside, give it the industrial look :D. Making it all even inside is TOOOO much work for a guy to do alone, or even for a professional shop! So I think you should just go with it, add more, or leave it as is, and accept that it is way too tuff to figure out :D.

Quote:

---

Originally Posted by shane_lxi

hmm, just add more screws to the inside, give it the industrial look :D. Making it all even inside is TOOOO much work for a guy to do alone, or even for a professional shop! So I think you should just go with it, add more, or leave it as is, and accept that it is way too tuff to figure out :D.

---

Industrial look, LoL!

I figure theres 3 ways thats not to hard: 1)clear lense with colored bulbs and chrome reflective paint on the inside 2)flourescent plexiglass on the inside with colored bulbs 3)just paint em red

We will see if i can find some of the stuff to make them off. :)

soljaboy2000--> Well i could, but theres the shipping half way round the world which i dont know much about and dont know if i should trust.

I kinda like them!

lol, I was just jokin on the industrial look thing. :D. Just get rid of the round relfectors, and add the red discs from semi truck trailors in there :D. It will have an altezza look, nit my style, but still custom :D.

:D

Quote:

---

soljaboy2000--> Well i could, but theres the shipping half way round the world which i dont know much about and dont know if i should trust.

---

hey just put em ebay and I'll use buy it now

i need to know how to take off my tail lights. ive looked at it and it seems that there pretty well stuck on there. and i felt like i was going to break them. :help: