Printable View
well now that im thinking about getting a coil i need some good plug wires, i looked on ebay and all them have the "really long ended" plug wires for cars of a later date than ours, anyone seen these around that will be GOOD and low resistance thick etc (my connector just fell off on my plug wires) but not cost too much?
well, you can get crane cams wires from this place http://www.optauto.com/webstore/prod...number=6&last=
the top three. i know it says prelude, but they will fit. trust me. the only problem i didn't like about crane wires was that they are not resistor wires. they allow too much noice to go to the radio, but that is what you get when you buy this kind wires.
another place to get wires is this one http://www.kingsborne.com/3fs.htm a few members on this board have this wires and they like it.
In reality, you don't need thicker wires. just get yourself a set of NGK wires. i got mine from advance autoparts store http://www.partsamerica.com/PartDeta...artNumber=9560
get universal crane cam fire wires straight boot for a 4 cly they run about 30-35 bucks
Just get a set of NGK's. I ordered the NGK's and Cranes at the same time and went with the NGK's because they seem to have more of an OEM fit to them. Look HERE to pick up a set of NGK's for 14 bucks, you definitely won't regret buying them, especially for under 14 bucks
thanks vinni ill look at that, and i checked that out shepard (thanks) and i found some hey look at these ones guys, these should fit shouldnt they? they look like they are really good tho too REALLY THICK? an origionally $125
http://www.optauto.com/webstore/prod...k=yes&dept=312
crane wires will fit with no problem. they are very thick. you will like them.
thick is good i ordered some, thanks hopefully the interference wont be too much! (i bet tehy look pretty cool too!)
