Printable View
would anyone want to share their learning experience, who have sucessfully, adapted front & rear strut bars & tie bars from other different strut bar brands for year & models to fit on ur 3g accord...........plz be detail, state precisely what u had to do to make it fit & the amount of time or effort required.......thanks guys & gals
90 Accord Ractive strut bar
First you wanna unbolt the igniton coil bracket and put it out of the way.
Then dry fit your strut bar. Next your going to take the two brackets of the strut and where the 3 predrilled holes are take a jig saw and cut them into a u shape. Next line up your brackets and push them over as far as they can go.
Fianally your going take a hammer and tap the brackets so they bend untill you can fit the bolt through both sides of the brackets.
Estimated time 45 mins
thats just front tho
what bar can b modified for the rear..im curious
97 accord rear strut bar for the 3g rear
thanks bitesize!!
straight-up bolt on? what mods if not?Quote:
Originally Posted by BITESIZE
thx man
have anyone tried 2G teg strut bar for the front. the suspension is identical to ours and the bolt mounts are identical.the width of the car almost there. Teg is narrower by less than 1 inch. may be not even that.
i just thought i would ask.
Quote:
Originally Posted by BlueBead
You have to redrill new holes, these are what justin is selling.
yea the 4g-5g bars will work, but I havn't tried the front. also the civic front bars will work not if you have the 86-87 TB. The rear mounts take`some serious work, not your typical re drilling.
can one of you guys make a picture tutorial for this. i wanna do it but i need a picture guide to do it . thanx
