Printable View
I didn't really find anything with the search thing..
I was looking at getting some 16" by 7" wide rims with 205/40 tires. Does anyone know if there will be rubbing with the car dropped 2 1/2" in the front & 2" in the rear? I'm worried if the tires are going to rub anywhere.
The rims have the 40 mm offset.
Thanks, dd
I have not seen that done on a 3rd gen., they sound like a wild profile. but then there is whole lot I aint seen lol
the offset may be a concern with a 205/40. you wont know til you try possibly
I was thinking 205/50's might work, still not so sure though.
I ran a 205/40 on a 16x7.5 +35 or 38, and the rear fenders rubbed a tiny bit. A higher offset would have helped so I wouldn't anticipate rubbing issues. At worse you might need to roll the fenders a tiny bit.
I don't understand how a 205/40/16 is a 'wild profile'?
Alex
i have 205/50/15 on the rear of my dx...and does not rub....im lowered about 1.4 inches.
:lol: generation gap?
I guess it is not <wild> by todays standards by no means.
I could have just mispelled w i d e:)
A collegue put 155/40/18 on his SC grand prix and in less than an hour bent a wheel. He was used to drivig lowriders too, so i guess it didnt take much.
I may have the 155 part sightly off but its close.
If you can get a set up like that at a deal that is cool, you are upgrading your sports car. Just like adding louder exhaust, you want to flex that muscle just because the car constantly reminds you it is there. Same woudl go with extreme suspension mods and inpractical wheel and tire sizes. You have to admit the more you make cars cling to the earth the more you take away from the DD flexability, it is a sacrifice. Just telling it like it is, and yes Im guilty, im running 195/50/15 on the front and yes it feels like im rolling on bare rims sometimes, and I have to anticipate :angle of approach: constantly...then again I push into on ramps to the interstate twice as fast as I would before..its a sacrifice yes
Hahaha fair enough.
40 series definitely isn't known for its ride quality, unless it's like 255/40 so you have a meaty sidewall :)
Alex
The back will be fine. The front might rub though. Im running 205/40/17's with a 2.25 inch drop all around and it doesn't rub at all.
That was what I worried about. I'll just get some 15's at 6.5" width wrapped with 205/50's. Can't be taking a chance with the front so far lowered. Might snap some pics when I get them.Quote:
Originally Posted by bullard123
Appreciate all the replies & generation gaps. :)
yaw take into consideration any difference between hatchbacks, sedans and coupes,Front should be about the same but the back could be a blonde puddy hair different
The rims I was originally going to get, got discontinued & sold out. So I had to get the next cheapest rim I could afford, so I picked these. Watcha think?
http://www.discounttiredirect.com/pr...sev.sm.ang.jpg
nice i likeQuote:
Originally Posted by ddude2uc
I like those, I want some
I just dont like the ones similar that the spoke protrude outside the rim so much that they hit things.
i really like those :D
I went to do the deal & seen a better deal. These are the rims I was going to get but in chrome, but can't beat the price now. Rims & tires for little over 5 bills, not bad if you say. Off to buy before I change my mind.
http://www.discounttiredirect.com/pr...rac.sm.ang.jpg
http://www.discounttiredirect.com/pr...sev.sm.ang.jpg
I like the look of these with the exposed lugs
I like the other rims myself, but I can use an extra $75 on other things for my house. (if you know what I mean, trying to fix it up & all)
Plus, I'm just happy that I can get rid of the steelies. Anything is better than them.
Yeah I Understand that all too wellQuote:
Originally Posted by ddude2uc
I'll sleep on it tonight. I haven't got an email yet confirming my purchase. They might be sold out of them (my luck again). I'll call them in the morning & see what is up, if their out of stock I'll pony up the cash for the other set. :)
hey if those are alloys with chrome be sure to look each rim over super good for any flaws what so ever. Those plated rims are discounted severely sometimes and then resold for retail.
Unless of course they are just polished, then I would not understand why they are less money.
The shiny look would go with your maroon car but not all colors, IMO
how long have you been shopping for rims/tires? that price was pretty good for 16s
My order didn't go through cause I was using my back button too much. I called them & got the exposed lug rims. They are 15's, not 16's. I would have trouble with 16's hittin the fender dropped low. I'll get some pics next weekend with them on the car.
Cant wait to see them on the car :thumbup:
Good choice!!
Quote:
Originally Posted by ddude2uc
the rim size doesnt matter since you have to get lower profile tires for them...the offset is that determines if its going to rub or not....38-45 offset should be ok with our cars.
15 is just fine, they are going to look good..and tires should be more reasonable ..locating and paying for them..
