Front bumper, fenders, headlights and corner lights
Printable View
Front bumper, fenders, headlights and corner lights
You take the bolts out.
headlights and corner lights are easy there are just some screws the bumper you have to remove the bumper lights and behind them are 4 bolts.. for the fender you need to pull the bumper then there are like 10 or so bolts plus the wheel well lining
follow the link in my sig to the 3geez wiki from there you can download a shop manual
Fenders suck to remove btw!
they're not that bad the worst is the screw near the door it's hard to get to it without fucking up the paint on the edge of the door :( or the wheel well lining if you accidentally strip one of the screws.. but they're plastic so worse comes to worse you can just cut it out.
btw for the wheel well screws you have to hold the outer part so that it doesnt spin with the screw
Flip up your head lights using the magic button :)
unscrew the corner lights to get access to the fender bolts behind the corners. oh hehe maybe they were behind the bumper and not the corner lights. it's been a while since I removed a fender. :)
