1.6 Weber Carb

I got the 1.6l Canadian version, i was looking on the weber site and i noticed that there is not a 1.6 for my year but there is a 76-83 1.6 and 1.8 kit. while this kit fit my 84?

The kit from the 76-83 probably will not work. Have you taken the carb off of your intake manifold to see what the mounting base looks like? If so, you might be able to compare it to another kit online. I haven't ever seen anything for the EZ motor online, and it might not be common enough for any companies to have made it. The kit from the 3g Accord might work... Worst case, I bet there is an intake manifold from another car that will bolt onto your head, then you can get the adapter kit for that intake manifold.

You should get some pics of your carb and your intake manifold and get post em up. Someone might see something that might work, or at least something close that you could adapt.

Here's the stock intake manifold for my car. If the ports on your head are the same, you could probably put an intake manifold off of my car onto your head, plug the CVCC hole with some Quicksteel or other steel putty and bolt on the Weber. The sad thing is that the US intake manifold is nowhere near as pretty as the one on your car...

http://i66.photobucket.com/albums/h2...k/IMG_2675.jpg
http://i66.photobucket.com/albums/h2...k/IMG_2676.jpg

thanks man i got a spare carb i can take a picture of, i know it sounds funny that i have a extra carb and looking to get a weber carb, ill get the pic tommorow of the carb

It's not that weird. Honda doesn't support their product anymore. I bet it's especially bad up there with that not-so-common motor. Webers and their clones are plentiful, cheap, and there are parts available for them everywhere.

yea its a real shame i can't find any parts for my car, i have to get 1.8 parts

alright i took off my carb, the first time ive ever touched it really :p

http://i50.photobucket.com/albums/f3...g?t=1198106229


here is the rebuilt carb i have

http://i50.photobucket.com/albums/f3...g?t=1198106184
http://i50.photobucket.com/albums/f3...g?t=1198106125

also what is this hose i found it before i took the carb off just sitting there, it had a broken end that looks like it would go onto a carb or something. The hose comes from the charcoal canister

http://i50.photobucket.com/albums/f3...g?t=1198106358

OMG i had a 1.6 before my sister killed my car...............:violin:

umm good luck with weber carb thing. you might be able to take an intake from an older 1.6 or 1.8 or maybe even get an adaptor for it. good luck tuning the weber once you got it on there. if you ever need a new carb for your 1.6 i got one of the 3 left in Canada. sell it to you for say 100 bucks. it has like 30 miles on it.

I believe that is the hose that allows the vapors stored in the charcoal canister to be delivered into the system to be re-burned.