Re: Gauge Cluster Corrosion
I'd hit the junkyard and pick up a swapper.
Re: Gauge Cluster Corrosion
prob best to find a way of replacing it all. corrosion sucks and is hard to get rid of. new cluster, wire, and a soldering gun would be the way i'd go
Re: Gauge Cluster Corrosion
Ok. Thanks. So there's no hope for alleviating the corrosion on the current pc board/cluster?
3gee accords are extremely rare here in the land of oblivious rednecks and the junkyards of Alabama. I've found two, in Cullman, Al. but one's on a carbed auto accord and the other on an auto prelude...i have a 5 speed...would this present much issuance, using an auto gauge cluster for a 5sp?
Re: Gauge Cluster Corrosion
You can use a auto cluster on a 5 Speed car but you'll have the park light on all the time. You can not use a carb car cluster in a EFI car due to the fact that it doesn't have the VSS sensor that the ECU needs, so you'll get a check engine light.
87-89 Clusters are swapable into a '86 they just look a little different
Hatch and Coupe clusters can be used in a sedan but wont show what doors are open right unless you swap the display from the sedan cluster in.
And finally some cars have a NS Cluster and others have Nippondenso, either cluster will work in any car, but you cannot swap parts between those 2 clusters. The nippondenso cluster is great if you want to change the color of your gauges since it just uses colored bulbs to color the gauges vs the NS which uses a plastic film thats built into the cluster.
Clusters are tooo bad on ebay:
'86 LXI MT $39 shipped
http://cgi.ebay.com/ebaymotors/1986-...s#ht_500wt_787
89 LXI MT
http://cgi.ebay.com/ebaymotors/1989-...#ht_1119wt_702
Re: Gauge Cluster Corrosion
Re: Gauge Cluster Corrosion
Try an old tooth brush and some tooth paste,not the gel kind.
Re: Gauge Cluster Corrosion
Quote:
Originally Posted by
Dr_Snooz
Pics of said corrosion?
I'll Take some pics when my roommate gets home. He' got an HD camera. My last camera broke awhile back at the Fire College.
Re: Gauge Cluster Corrosion
it may be a bit of a drive for you but check PullaPart.com Birmingham,AL location they often have some 3G hondas
Re: Gauge Cluster Corrosion
might as well try "restoring" what you got for now. i can grab you one around here in north florida prob. send a pm if interested