Printable View
Ups just dropped off my new dropzone lowering springs. I've read through, but no one seems to mention negative camber occurring. Just curious as to who has used dropzones or any other spring and how bad their camber was if at all. And if it's bad who used what camber kits, what worked And what didn't, any input is appreciated! Thanks!
Most people that lower their cars lower than an inch and a half use 2nd gen prelude upper control arms in the front.Also you could use 3rd gen arms also,just not as much adjustment.There is a write up under suspension section.
Im dropping it 2.25 inches, does the rear even camber? Or should I just worry about the front? Which thread is it? Thanks
Some of the guys on here used washers between the control arm and the body for the rear camber.
the camber is bad.
im going to need to also find out how to fix it.
maybe ill try to find some lude arms
the rear camber is worse than the front. ive already killed my rear tires within a month.
but the rear tires were old and hardened. so that might also be a factor in quicker wearing.
edit. im also running drop zones.
