DAM!!!!!!!!!!!!!!Quote:
Originally Posted by 1ajs
Printable View
DAM!!!!!!!!!!!!!!Quote:
Originally Posted by 1ajs
wow talk about a rust bucket!!!! LOL
Quote:
Originally Posted by Strugglebucket
I'm in the same boat... but the previous owner of my header did the damage for me.
http://i23.photobucket.com/albums/b3...y_girl/e21.jpg
http://i23.photobucket.com/albums/b3...y_girl/e22.jpg
http://i23.photobucket.com/albums/b3...y_girl/e23.jpg
http://i23.photobucket.com/albums/b3...y_girl/e24.jpg
:eek5: GOLD!!!!!!!!!!!!!!
Quote:
Originally Posted by Overdosed A18A
Stainless... soon to be one of a kind.
thats my 2g lude before pic http://memimage.cardomain.net/member...872_8_full.jpg
a20a3!
here are some good ones finally,thanks eric!! in one of these I think you can see my solid dog bone i just made
http://www.imagestation.com/picture/...9/ed99c771.jpg
http://www.imagestation.com/picture/...3/ed99c75c.jpg
http://www.imagestation.com/picture/...9/ed99c74a.jpg
http://www.imagestation.com/picture/...8/ed99c729.jpg
the opening on the side of the air cleaner is for a hot air tube,I built a custom hot air door thats sits on the manifold itself,I just didn't have it installed in the picture. it's for carb icing conditions and works like factory,except I can switch it on and off.
Here's my pics before the rebuild
http://i34.photobucket.com/albums/d1.../324959_41.jpg
This is after the rebuild and during the install me an my friend did.
http://i34.photobucket.com/albums/d1...7/DSCN0853.jpg
http://i34.photobucket.com/albums/d1...7/DSCN0846.jpg
like CT says that is very Hawt
http://www.imagestation.com/picture/...9/eff57d5f.jpg
http://www.imagestation.com/picture/...1/eff57d39.jpg
http://www.imagestation.com/picture/...3/ef98c3ee.jpg
http://www.imagestation.com/picture/...b/ef98c39e.jpg
these are old, n everything is on the motor now... I just don't feel like uploading new pics now...
whoa, I have some work to do, Definetly going to do a b-series swap on my 89LXi i just scored on ebay. WHen I have the motor out I might tow the thing to the car wash and SCRUB IT down with some degreaser.
As for the 07' Si Civic, not much going to be done to it until the warranty expires and I pay if off...
Military Mase - you 82nd???
3rd group, i'm getting ready to go to the stan.
jigga, your car looks like ice, the silver and the blue looks pretty cool
:rly:Quote:
Originally Posted by wohdog
Quote:
Originally Posted by wohdog
that looks beautiful :eek:
aside from type-g ive seen only like 3 other a20a3 valve covers that re polished
looks really good!
do u cut a hole under your battery plate thingy to put the cai in? i dont get how the battery still fits in nice :S
depends on the size of the piping and the battery.Quote:
Originally Posted by Overdosed A18A
We widened the hole into a oval shape so that the pipe could go in at a angle. I can take pics if you want.
Thanks Bro. :DQuote:
Originally Posted by Cheeseburger
looks nice....i need to install mine....these are not smog legal in california...i have to smog my car again in april....im just lazy....one quick question...did you cut the pipe at all and what kind of filter are you useing?Quote:
Originally Posted by 89cordlxi
Had to cut the pipe no other way of getting it to work..
as for the filter I used the one that came with it for now.
love the new one!
use the generic purple stuff from Nappa,use it full strength then hose it off with a water hose. it's amazing stuff,took most of twenty years of grime off with no scrubbing. what is white under my hood was grimy gray and black,I had also had a PS pump puke fluid all over everything. it didn't hurt my painted parts eithier. took everything offQuote:
Originally Posted by AccordinglyAZ
http://www.imagestation.com/picture/...3/ed99c75c.jpg
My Ugly Engine. Defintly a work in progress.
http://img228.imageshack.us/img228/3706/kif4584va2.jpg
http://img150.imageshack.us/img150/1208/kif4585nh8.jpg
http://img167.imageshack.us/img167/5205/kif4589cr2.jpg
Can any of you super smart people tell me how you stuffed your CAI in the bumper i have an intake funnel, I can use I just don't know how to route the Hose.
Here you go DDRaptor. Theres lots of good info here: https://www.3geez.com/forum/search.php
DDRaptor, they usually cut a hole, but seeing yours is carbed, it prolly isnt even worth it, the stock cai is good enough ;)
o, :welcome: :D
carbs like warm/hot air
it makes a difference,I've noticed a big difference with my cowl induction. this is not a project for those squemish about doing serious modifying. or cutting body parts. I wish I still had my data from the flow tests but I belive I lost it on one of my old hard drives. this involved a lot of modifications and changes to the actual intake piece to get the best flow rate. the basic shape of the aluminum part is made from an antique aircraft intake casting. it involved a lot of time changing the length of the tube welded to it and grinding material off of the inside of the casting. kind of like porting. I used a mass airflow sensor hooked up to an ohmmeter. and did a lot of tests driving up and down the taxiway at work. the hot air intake tube is actually taped off inside of the aircleaner,I don't have the hot air stuf done yet for winter. the piece attached to the carb is actually several pieces,there is a metal ring that fits over the carb neck,then a machined aluminum ring that attaches to it. it anchors to the carb using the original intake screen,which holds the metal plate to the carb. the original rubber donut from the aircleaner sits on top of the carb neck,and the metal plate is sandwitched between it and the screen. the carb neck plate can be removed from the ring to make ones for different carb using the same setup. i built adjustment into the system from the design stage. it's anchored to the aircleaner using a urthane link like a swaybar end link. the whole thing can move slightly. http://www.imagestation.com/picture/...3/ed99c75c.jpgQuote:
Originally Posted by Overdosed A18A
Some nice looking engines... SataniC, yours looks dope, but damn that siren is HUGE!
I should hopefully have some engine pics of the b kind in the next couple months, gotta get building for spring!
thats actually a PA system...lol...my car is basically an undercover cop car...complete with police siren and blue strobers...ahhahaha....good when ur rushing thru trafficQuote:
Originally Posted by Hash_man_Se_i
:O a undercover cop car is a 3gee, thats awsome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
wow thats cool now get a video with you racing down the street and ppl moving out of the way...btw i love the swapQuote:
Originally Posted by SataniC
Here is my engine bay after cleaning.
Stock engine plus CraneCams Hi-6A, SplitFire Plug Code, illidium plug, Optima battery, camcover repainted.
http://memimage.cardomain.net/member...3_178_full.jpg
got some more engine pics and finally some pics of the PS cooler
breather for engine controls
http://www.imagestation.com/picture/...0/ed314548.jpg
solid dog bone,sorry it's so blurry if someone could sharpen this I would appreciate it.
http://www.imagestation.com/picture/...6/ed314544.jpg
http://www.imagestation.com/picture/...b/ed314515.jpg
http://www.imagestation.com/picture/...6/ed3144d1.jpg
http://www.imagestation.com/picture/...7/ed31448d.jpg
http://www.imagestation.com/picture/...8/ed314455.jpg
http://www.imagestation.com/picture/...7/ed314401.jpg
http://www.imagestation.com/picture/...5/ed3143ba.jpg
http://www.imagestation.com/picture/...a/ed314358.jpg
..............................................
PS oil cooler,cooler is a BM cooler I got for ten bucks at the yard
http://www.imagestation.com/picture/...c/ed31426b.jpg
http://www.imagestation.com/picture/...2/ed3140c2.jpg
http://www.imagestation.com/picture/...1/ed3141f8.jpg
http://www.imagestation.com/picture/...6/ed314183.jpg
[hit by a drunk guy on a golf cart at full speed] LOL
oil cooler looks sweet!
SIR!! YOU ARE BEING PLACED UNDER ARREST FOR POST PROSTITUTION! PLEASE PLACE THE BURGER ON THE HOOD OF THE CAR AND TURN AROUND. YOU HAVE THE RIGHT TO REMAIN SILENT,WE SUGGEST YOU USE THIS RIGHT BECAUSE WE WILL TURN OFF THE CAMERA AND NOT BE RESPONSIBLE FOR WHAT HAPPENS, YOU HAVE THE RIGHT TO AN ATTORNEY,IF YOU CAN NOT AFFORD ONE,RONALD MCDONALD WILL BE APPOINTED TO YOU. http://www.vincepinto.com/misc/2/p-specialload.jpgQuote:
Originally Posted by Cheeseburger
lol *sigh*:(
:):) hey just messing with you buddy!!! you know you make this board fun!!Quote:
Originally Posted by Cheeseburger
some people dont think i do... have u noticed i dont post that much... :(
Tim hit me up on yahoo when u have a chance
I suppose you are talking about me. Well I never said I don't enjoy having you on the board. But the post whoring has to stop. It's against the rules. If I let you do it then I have to let everyone do it.Quote:
Originally Posted by Cheeseburger
It's posts like ^ that, that cost the board money. I'm sure you think it's funny or cute or somthing like that, however whenever you reply to a thread you use bandwidth, most people have auto subscribe turned on, so the board sends an email out to everyone to notify them that someone has replied, which uses bandwidth, and generally people come back to view the thread again to see if there were any more replies, and that uses bandwidth. We are only alotted so much per month and then we either get cut off or we have to pay for more. So what you guys think may be funny or cute may be costing others money. Not only that but the title of the thread is "engine ONLY pic thread", not "post meaningless crap thread".Quote:
lol *sigh*
why doesn't everyone keep the post whoring in off topic or OTX? this would save bandwidth and a lot of people like to talk about nothing on there anyway. we need a thread call no topic. cheeese brg' a lot of people like you,you are a cool guy and you've really been working hard on fixing your car. don't get down on yourself. now somebody post some more cool engine pictures please!! :)Quote:
Originally Posted by Cheeseburger
hehe my B20
http://img58.echo.cx/img58/5040/duelcarn2ax.jpg
remember me saying that? well if ya dont, its on the 1st page on the 1st post of this thread :DQuote:
Originally Posted by Overdosed A18A
maybe should start a chat thread in OT?
since my 1 n only rule got destroyed... 1ajs, good stuff :rofl:
Hmmm Hard to believe this was back in early 2001. Ahhh how times have changed and the quickness of time has passed...
http://jballoucomputers.com/accord/images/dsc00064.jpg
ok a mystery engine part in raw form ,what is it? click on my signature and follow the pictures link on the first page and look under air cleaner album. (this is my pathetic way of saving bandwidth)
http://www.imagestation.com/picture/...e/ed007a4c.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
ZC - 1988 Honda Integra LS - Rated 135HP/108lbs TQ
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
C32A TYPE I - 1991 Honda Legend (Base) - Rated 200HP/210lbs TQ
Pics of the front strut bar that I got from Justin86 installed:D
http://img.photobucket.com/albums/v3...tstrutbar2.jpg
http://img.photobucket.com/albums/v3...tstrutbar1.jpg
http://img.photobucket.com/albums/v3...ntstrutbar.jpg
whoes this enginehttp://img82.exs.cx/img82/8264/38207396full3oq.jpg
looks like a 2nd gen lude
its Adams u nOOb.... that was when he first got it....
That looks RWD, are Legends RWD? I didn't think they were.Quote:
Originally Posted by maxoutracer
Nope they are transversely mounted front wheel drive vehicles. I guess Honda was experimenting with it :dunno: .Quote:
Originally Posted by speedpenguin
You mean longitudinally mounted? Transverse is what we're used to seeing in an FWD. I'm personally having trouble figuring out how they made that work.Quote:
Originally Posted by Legend_master
Hey here is a few pics of my Accord. :huh: :devil: Not looking so good right now but I am fixing it up. Tell me what you think. Its going to be a complete rebuild.
http://img56.imageshack.us/img56/47/cimg2118mw5.jpg
hmm i wonder what they got out of that by having the engine like that
Quote:
Originally Posted by speedpenguin
Sorry yes that's what I mean. The tranny look similar to a RWD one, long and pointy, But the axle lug into the sides of it. I cant remember id it has a half shaft or not. Let me see if I can did up some pics.
Just like the old Chrysler Concords:bong:Quote:
Originally Posted by Legend_master
Heres mine derty engine... i figuret thet i gona just wash it, majbe some spray paint on cam cover.
coz i wait for mi new engine b20a. and that engine gona shine.
http://i91.photobucket.com/albums/k3...o/DSCN7695.jpg
:wtf: That's MY engine pic, HTF did you end up using it as yours??
Quote:
Originally Posted by Ronnie Harrison
bahhahahahahahahahahahahha :Owned:
Well shit I was going to post one of those pics and one of my empty engine bay, but looks like someone beat me to it..... :rant:
does that mean that there is a 3G poser amongst us.........Quote:
Originally Posted by RamThis
:rant: :rant: :rant:
It would appear so..... I looked at where the pic is hosted, it's not on my Dodge gallery, and the pic name is changed, but, thats DEFINITELY my engine pic..... :huh:
I was looking at your rebuild thread and I saw this picture from a different angle
http://www.dodgetrucks.org/gallery/d...0/100_4230.JPG
Thats adam old B20a before he went turbo but i have it now:rockon: http://memimage.cardomain.net/member...7_152_full.jpgQuote:
Originally Posted by MessyHonda
I took a couple today,I finally got most of my hot air system in for winter,it took a lot of engineering to make everything fit,and it was a bitch to get in there. I still have clearance issues between the air door motor and the left side fan,so it's not functional yet. I am going to look for a used fan that is thinner or buy a pancake fan from summit or something. it functions using the same controls as the factory hot air door,but I put in a solonoid so it can be switched off when not needed. it took about 40 hours of work to do all the metal fabricating for the air cleaner part,make the hose brackets,and modify the piece of the air cleaner that goes on the manifold shield,as well as the manifold shield itself. been working on it on and off for quite a while now. it was a pain in the ass because the piece that welds to the shield warped from the heat and the airdoor wouldn't work. just a lot of bending and beating,now it works right. for a note all the brackets that normally hold the power steering hose and ac hose are off right now,I haven't had the chance to finish polishing them yet.
http://www.imagestation.com/picture/...6/ec32b4d1.jpg
http://www.imagestation.com/picture/...4/ec32b4dc.jpg
http://www.imagestation.com/picture/...f/ec32b4ea.jpg
that hose is the silicone hose that they use on aircraft and race cars, I found a piece thats been laying behind one of the machines for years,we couldn't use it on a new airplane because it was slightly scuffed. bad for them,good for me. :) somewhere on here is a thread when i was making all those parts for the system,I'll have to look for it. I've got the pictures somewhere
Here's mine, since y'all can't get enough of my car. Or is it that I can't get enough of my car?
Either way, I can't pass up this opportunity to whore it up any longer.
http://i64.photobucket.com/albums/h1...n/IMG_1859.jpg
^^^speed are you going to mod it?
Eventually, I want to pay it off first, and I also want to really reach the limits of the car first, so I have an idea of what needs to be improved.
This is a hell of an upgrade from my DX, so I'm pretty happy with the way it is right now. Once the suspension starts holding me back from going as fast as I could otherwise I'll swap it out. Same for air system mods. I'm going to rebuild the engine before I do any engine work.
Or I may end up leaving stock, who knows?
^^nice nice very nice!!!
Impressive!
new pic since i got the dcs headers
http://i5.photobucket.com/albums/y18...d/PC150132.jpg
http://i5.photobucket.com/albums/y18...d/PC150133.jpg
Yeah. No more D-suxteen!!!!
http://img.photobucket.com/albums/v1...d/52ce1da4.jpg
That a clean engine bay....Quote:
Originally Posted by Xybris
:jaw: another engine bay were the exhaust heat shield has no rusty brown spots. thats awsumly clean :eek: :thumbup:Quote:
Originally Posted by Xybris
anyways, heres my A18A:
http://i34.photobucket.com/albums/d1..._2408Small.jpg
and here's my going one, i carefully managed to rip off the dizzy advance hoses and made them better look :thumbup:
http://i34.photobucket.com/albums/d1..._2405Small.jpg
http://i34.photobucket.com/albums/d1..._2400Small.jpg
^^i hope that holds since the hose is suposed to go over that nub instead of inside it... fits tight-ish though
http://i34.photobucket.com/albums/d1...2397Medium.jpg
ill post pics of my v6!!! later today
Quote:
Originally Posted by Cheeseburger
honda only please...:thumbup: i dont want to see your gas sucker rodeo
http://img182.imageshack.us/img182/1431/1002082oy4.jpg
WOT is a great sound in this car. :)
Nice one CAH!
Quote:
Originally Posted by Acid X
oooooooh new IM noice!
Yeah i have an aem fuel rail too but when i installed it, it sprayed everywhere for some reason. Rather odd.
there will be a pic of a diff engine 2maro night :)Quote:
Originally Posted by speedpenguin
Where did you get this intake? Brand? Looks Kick assQuote:
Originally Posted by Acid X
