Inputs for my custom tails (pics inside)

i'm takin my EX to the scrapyards (the one on the left )
is that the lights u all talkin about ,,, if someone wants anything of that car give me a word

Dude that looks exactly like mine. How bad shape is it in? Because mine doesnt look to be passing inspections because the rear side-members are corroded (vanger på dansk).

Quote:

---

Originally Posted by 3rd gen 89 se-i

i need to know how to take off my tail lights. ive looked at it and it seems that there pretty well stuck on there. and i felt like i was going to break them. :help:

---

Use a blow dryer, that's what i did.. Took a while to heat-up the tar like glue, but once it is, comes apart soo easily.

Quote:

---

Originally Posted by thegreatdane

Dude that looks exactly like mine. How bad shape is it in? Because mine doesnt look to be passing inspections because the rear side-members are corroded (vanger på dansk).

---

hmm as my english sucks and my danish to =)

give me one more hint

and inside pic

Anybody want to buy my euro corner lights? I don't have the part for the trunk since I had tit on one of my ohter 3G's when it was towed.

thegreatdane, how did you get the front peice off? I don't wanna damage my tail lights, so whats the best way to get all 3 peices off?

you have pics of em

Quote:

---

Originally Posted by SLVR3GHB

thegreatdane, how did you get the front peice off? I don't wanna damage my tail lights, so whats the best way to get all 3 peices off?

---

You need to remove all accessories, like bulbs, wires and all plastic that can be taken off. Then you throw the taillight in the oven to warm up the glue. This way you can slowly pry the lense apart from the housing when you take it ouf of the oven again. Remember to do it slow and carefully to avoid damaging the lense.

My taillights are in standby. I'm waiting to get another accord, because my current one will be sold for scrap... (I was in an accident with it and bent the frame.. :mad: )

Anyone has any extra tails that I can use for a spare just incase? I'm good at fabricating, but when it comes to taking the lenses off, I'm affraid I'll damage them. I allways wanted to do Semi Clears to my tails.

Explain what temp and how long you left the tails in the oven? Someone told me to drop the tails in a bucket of VERY HOT water for a while to warm the glue up enough.

Here's a photoshop I done.
http://us.f1.yahoofs.com/users/fe7cd...VZ4RAB4zzEppNV

anyone ever thought about custom mustang tail lights? i think the new euro tails for the 03 mustangs a kick ass, think they could fit after some fabrication?

Quote:

---

Originally Posted by SLVR3GHB

Explain what temp and how long you left the tails in the oven? Someone told me to drop the tails in a bucket of VERY HOT water for a while to warm the glue up enough.

---

I placed mine in the oven for about ~5 minutes at 90 degrees celsius. If that doesnt do the trick just put them back in a little while. It's very easy. Just remember to remove everything that can be removed to avoid melting it. I think I just used a screwdriver to pry them apart.

But be very carefull if you use the screwdriver. It's an old lense so it's easy to brake of a chip or cracking it.