does it fit the a18 too?????
does it fit the a18 too?????
I apologize for not letting you know I forgot to mention to you S&H is not included. For those of you in the 49 states it will be $10.50, includes shipping and packaging. For those who are not I’ll have to find it out, possibly from $10-25usd.
(Ps: payments for s&h can be collected at this time or when I recive the cam gears before I ship it to you.)
I am going to continue with the order for the cam gears for the A” blocks. But only I fthe very few that have requested them please send in your payments.
I actually don’t keep up with the post on the board sorry so the questions on there I may not know about.
I know I haven’t replied to many of your emails because many of the answers were answered in the postings. By the way if I were to keep up with all the emails I wouldn’t have time for any thing else…..
Tomorrow I am going to recheck up on the order, as of right now its still in progress. As of now I know they are waiting for me to send in a beginning deposit, so I am also waiting for you guys to send in your orders and Deposits/ payments.
The very few of you that have actually followed through with your orders, I Thank you for your cooperation .
But for those who are confused, I hope my instructions were clear but here it goes again:
1. Send me an email with your intended order so I make adjustments to the final order. I.e.: blue, red $115, silver $110
2. Send me your order with payments made to either I or open-loop motorsports via: check , money order, or pay pal+3%
3. Remember your order is not complete until I receive payment .
4. I’ll try my best to contact you that I’ve received payment.
5. I verify that all s&h has been paid and products shipped out
I appreciate the Good ideas from 89accordlxi who is supporting this product, thanks to you.
Yes, I do accept pay pal +3% to my email address: [email protected]
I thought I mentioned which vehicles wil fit this application…
Yes, an A18a from a 82-86 accord / prelude will fit this ( if its closely related to the A20A model piece)
If you guys want to make this possible please send in your payments I need 50 orders in the long run I’m still not even half way there, but close.
No, I haven’t for gotten about you guys.
Remember I want to make this happen as much as you do so help me out and I can get this rolling.
I ‘m waiting for you guys to help me out so as long as you take I’ll be waiting for you…
Any questions email me; ill try to email back… when possible , I hope I answered a lot of your questions.
I would definitely think these are worth a lot more than what I am selling them for so take advantage of that, like I said I’m not really making any thing of this I’m trying to help out the 3geez community increasing aftermarket support for the A20, cheers to you all.
Thanks Again.
Darryl
ps: read the other post if this is not full information. I'll try to repost in a couple of days to let you know whasts going on.
im in i want one
So write him an e-mail and send him money
Bump.
Just bumping this cause its to good of a deal to let past us by, and I want to keep in people's mind.
Don't worry about bumping it... I have it stuck up at the top... it won't go down too far.
I'm in - Thanks to OpenLoop for their continued committment to 3G performance!
After reading through all the posts in this thread, it appears that the following people have sent their money in for this buy (please correct me if I'm wrong on this):
1988starter
88' Accord Ltd
NOAHS88accord
Eric89Carb.
1hot89accord
89 Accords Rock
Cyric_accord
G Man89
Site
I'm not sure how many more we need ordered before Justanothermike can place the group buy order, but for $110 this should prove to be a nice addition to anyone who has modified his/her Accord's engine. From what I understand, if you've increased your engine's performance beyond the stock specs, then your valve timing will be off and your engine won't be tuned as well as it could be. An adjustable cam-gear is an easy way to tune your engine's valve timing to get the most out of your performance add-ons. The more work/add-ons you've done to your engine, the more important an adjustable cam gear is.
Remember, Justanothermike doesn't keep up with the board posts, so if you post a reply he may not see it for a while. But, many members of this board have ordered stuff from him and many here consider him to be trustworthy.
If you're reading this thread for the first time, here's the order information:
Fidanza Adjustable Cam Gears $110 +ship
http://www.aluminumflywheels.com/img...Gear_Front.jpg
Quote:
Originally posted by Justanothermike
Here's the details:
- 100% 6061 t6 Alunimum, half the weight of the stock piece
- The aluminum is hard anodized and temperd, stronger than cast steel.
- Lazer etched degree marks, for accurate adjustments and timing.
- CNC Machined gears for ultimate in precision timming down to the .001"
- 5 blots hold the pices togather for non-slipage accuracy.
I will be the only supplier of the cam gears.
For all that want red or blue I will need your orders now- ASAP.
Ineed to tell them how many Of what color this week.
Or else I'll just make silver ones for the rest.
- Nice to have custom parts to your specs
As of right now I'm selling them at cost (my cost) to you. so I will not be making an thing on these to help you guys out!!!
In order to make an order follow these few easy steps:
1) E-MAIL me with the quantity and color (silver=$110, blue or red=$115) you want and include your mailing address at:
[email protected]
2)Shipping: For those of you in the 49 states it will be $10.50. For those who are not I’ll have to find it out, possibly from $10-25usd.
3) I'll ask you to send me your check or money order made out to: Open-Loop Motorsports, or
4) Pay via PayPal to: [email protected] (add 3% to total for PayPal fees)
5) Make sure you give me your shipping address!
Thanks Again.
Darryl
ive been searchin for a cam gear for a while now,
damn right im in
I already bought 2 things this week so next week I should be able to.
Alright since I'm selling my prelude I will get one of these. I have to wait until after christmas though. Has anyone gotten theirs yet? Or does he need a certain amount of people for a group buy? B/c I will do it but I just don't wanna wait 6 months to get it.
still waiting for mine
If I remeber right, he needs 25 paid orders before he'll sends in the order.
he says 20 on the first page. maybe he had to change itQuote:
Originally posted by G Man89
If I remeber right, he needs 25 paid orders before he'll sends in the order.
cyric great cartoon lol
I would have a question how about a warranty? It seams this will be a small production run which leaves a chance a defect couldn't be found. I want to use them on my still in progress SCCA Improved Touring racecar so reliability is very important.
Alright guys, I just e-mailed Darryl asking him to give me a complete list of how many people have actually paid up, and how many more we'll need in order to make this happen.
I'll post up his response as soon as I get it.
yea if this is still going on i wanna get in... ive emailed them and got no response...
Just woundering if anyone that's paid for a cam gear has heard back from Darryl? I've emailed him a couple off times but no responce.
well i bought on like 6 months so far nothing as come yet so i don't know i think he might be keeping my money
Don't worry he is a good guy I bought on in the first week we will see them eventually.
I agree, we'll hear from him eventually. They are a reputable company, so I highly doubt we'll be getting screwed over here. He has not yet replied to my e-mail yet either, but again, I'll let everyone know as soon as I hear from him. Anyone who has not heard a reply from him yet, I would not worry too much. If no-one hears from him in the next few days, I'll give him a call sometime early next week and see if I can talk to either Darryl or Mike.Quote:
Originally Posted by 1988starter
Please be sure and post if anyone hears back from anyone at OpenLoop.
I sent him money a long time ago and haven't heard anything. Even after several e-mails.
I've had no problems with Openloop. They're a good shop that makes good parts.
I'm probably gonna dive in on the cam gear group buy when I secure a job again.
Just an update (if you can call it that).
Still no word from Darryl, Mike or anyone else at OpenLoop. I'll see if I can give them a call later on today. If I get an update, I'll post it up asap.
Well if we can get some more info on whats going on I will send my money when I know for sure this is happening.
