Printable View
Ok I have a strut bar that fits 92-00 civics and 94-01 tegs. It is the right length to fit on my car, but the bolt holes don't line up very well. Has anyone done this mod before? Is there a place where i can just buy the ends to bolt up to the shock towers or how can I mod the current ones?
I tried that one once, You could modify the ends I guess, but I heard you can take the ends off a strut bar from a 94-97 Accord and rejrill one hole and it will line up...
But I'd say just buy the DC Sports bar, it bolts right up and clears the intake manifold and intake perfectly...
Well it's so close... and there's no way I would pay that much for the DC Sports bar. The teg bar I have now clears the manifold and intake fine. Close... but it works. I just need to figure out how to get the ends to bolt on. Is there a place where I can just buy the ends off a 94-97 accord?
Don't be cheap, buy the DC Strut bar, you'll be glad you did....
aamen to that. go DC or at least one thats MADE for your car. find a local performance shop. dont dick around. YOu wouldnt tape a coffee filter to the end of your intake ..'its a filter...its close enough.."
[edited tiny typo]
You guys don't have very good imaginations! I will get this to work, and I'll post pics as soon as it's done, hopefully this weekend.
1988 starter has done this on his car! :)
I guess some people just don't want to spend money for real parts... hense the term Frankenstein add-on...
There is nothing wrong with Frankenstein add-on.
i dont see what the big deal is...
its a strut bar.. is dc sports metal better than ebay metal?
why spend 150+ when you can make a $30 strut bar work?? i guess i will never understand. then again u two (mike and chris) have lots of expensive stuff on your cars... hehe... so youre prepared to spend i guess...
Well i cant buy DC shit in my area does anyone else know if a different strut bar that fits my 88 accord carburated ??
Or if someone wants to sell their's drop me a line.
I do spend alot on my car, just wait until the meet and you guys can see what else I've added...
Well I like my cars to looks nice, so I usually buy the best. That stuff works great, and lasts. Rare you'll see me put some crappy mod on my car......
Same here... If it for the car I'll buy it, but if it's for some other car, then no way is it goin on... Unless its a new motor, then I don't mind...
The stock carb setup doesn't leave enough space between the air filter assembly and the hood to fit a strut tower bar.Quote:
Originally posted by King_Geez
Well i cant buy DC shit in my area does anyone else know if a different strut bar that fits my 88 accord carburated ??
Or if someone wants to sell their's drop me a line.
Yeah, your screwed, DC is the only company that mkaes them now, and there only for 88-89 efi's, but the are a good investment, and they do a good job, plus it's DCX and you know its quality, not like APC or something flimsey...
Oh... You can buy them on line from DC I think, our just try Nopi, they rape you, but you can still order them online, I think Nopi sells them for $180, or I can give you the number of a shop in Oregon who sells them for $150, and I think you can buy it by phone from them and they'll send it to you... I don't know I could be wrong though...
wow..this is completely unrelated and im sorry for this....but...speaking of frankenstein parts...
..has anyone heard from our frankenstien hatch boys in mass? the hatches with 'lude head lights,ect?
Thats not what Frankenstein parts are, those are called conversions- Frankenstein refers to mixing parts like the strut bar were talking about, and it also refers to motors, such as heads and transmissions...
Frankenstein is almost done!
OK everybody, I did it! All I had to do to get the bar to fit was drill one extra hole on each side, and bend a couple things out of the way. I also had to bend the ends of the bars a bit. I noticed a great difference in handling, probably just as good as the expensive DC Sports bar. I recommend this to everyone: buy the cheap strut bar off of eBay for $30 and mod it to fit instead of spending $150 or more on the DC sports one. It took me about 30 mins to get it to fit on with the drilling and bending, but when you consider all the money I saved, it was like I made $240 and hour! ($120 difference*1/2 hour of work). Good luck to everyone who does this!
well..kudos to you my freind, i hope it doesnt snap while cornering at 65.
hows it feel?
Feels like a baby's butt... j/k it feels awesome. I can corner faster now and it seems that I have a bit less body roll. This strut bar in addition to my Tokicos make my handling kick ass!
That is pretty sweet. I will have to check out ebay for the strut bar. Next you need to work on one for the back. :D
lol don't have room for one in the back... too much stereo equipment
Well that is too bad. I need to get my rear bar done before I start to add some subs.
doe sanyone know if this dc strut bar will fit the 86 prelude
weres these pics? :/
and also what did you do to mod your apc bar and which car was it from? what parts did you use
I tried that same mod with the 92-00 civic bar... just one hole needing to be drilled and the other enlarged slightly... the fuckin thing snapped a couple weeks later... we'll see how yours does
I have totaly forgotten about this thread, yea Mike was selling those APC civic bars. I'm going to try the teg one. :flipa:
