New Koni's for me on wednesday

Yea, I just wanted to tease you all a little :D
I just ordered my 4 new red Koni's today, after I got confirmed twice that they could be delivered, no problems at all. They should arrive wednesday if all goes well. Apparantly they are still being made. So i'ma just looking forward to recieving them, cus i'm not counting on anything untill they're on my doorstep. Tonight i'll be installing some soft 40mm lowering springs I bought because i wasnt sure if I would get Koni's, so I bought some soft springs that should fit my stock struts better. Well i'm done teasing you all :smokin: Have a nice day :super:

And for the curious ones, the price for all 4 was about 618 bucks in US dollars ;)

I'll kill him, please... lemme get a couple finger on him before I rip him to shread!:chainsaw:

joking, but that's sweet if they're still selling those bad boys, means I can still get my hands on em hopefully:deal:

Quote:

---

Originally posted by thegreatdane
And for the curious ones, the price for all 4 was about 618 bucks in US dollars ;)

---

and for the REAL curious ones, where the hell did you get them!?!?

Well, theres a (only 1) shop here in Denmark thats specialiced in Honda tuning/ styling etc. That's where i ordered them. Where they get them from, I dont know. But he said that they are still being made, when i made him check up on it. So howcome you yanks are being told otherwise I dunno :confused: But he did say that there has been alot of the Koni's going out of production lately.

:fight: :chainsaw:

Quote:

---

Originally posted by thegreatdane
Well, theres a (only 1) shop here in Denmark thats specialiced in Honda tuning/ styling etc. That's where i ordered them. Where they get them from, I dont know. But he said that they are still being made, when i made him check up on it. So howcome you yanks are being told otherwise I dunno :confused: But he did say that there has been alot of the Koni's going out of production lately.

---

Can you give the shop contact info and if they're willing to ship to the U.S.?:D

i bet the reason the guy at the shop told you that Konis are still made is because it is on his catalog. they were canceled this year. so the new catalog won't be released till next year.
I don't thinf you will get them. i think you will have to go with Tokico struts.

If you get konis ......Coooool Tociko...
You'ld better get a MUCH better price

I ordered konis through schwab's for 78 bucks a piece... you got jipped. There is a two week delay in the ordering process, and you might not be able to get them depending on the area in which you live, but In western washington, it's a good deal.

You are not getting Koni's. It's as simple as that. Websites have them listed but there are none available anymore. I called Koni directly and there's nothing left. That was a month or two ago. I was lucky enough to get the fronts. You may have placed the order but it will get canceled. I had that happen twice.

I talked with Tom Fowler from OPM Autosports (http://www.opmautosports.com/) last week and he confirmed to me that Konis for the 86-89 Accord have been discontinued. If you keep up with SCCA racing at all then you've heard of Tom and his group at OPM. They used to have a 3rd Gen Accord they campaigned in roadracing and produce a lot of custom racing parts for the 3G.

He said that with a bit of shortening, he thinks the rear Koni strut from the 92-96 Prelude would work on our cars.

Well, i guess we will just have to wait and see. He insured me that he could get them, AFTER I had told him that I'd heard that they had been discontinued. Butt i'm sceptic too, untill they're in my hands. I can only hope :)

maybe if we start a petition or something, koni would start making them again? yah, right, oh well...., i guess i missed out on those..., freaking army tearing me away from home and making me miss gettin the koni's....

So what happened? Did you get the Koni's?

They are at the post office. They arrived wednesday but i havent had the time yet to pick them up. I count on picking them up tomorrow though. I'll probably be able to take some pictures of them sometime in the weekend.

I was really crossing my fingers for you that they'd arrive. Glad to see that you beat the odds and got them. Enjoy.:wave:

Oh man, how I hate you. J/K. That's awesome. I wish I would have had the same luck you did.

Mike or Matt as some call him got front Konis through Tirerack this past week.

yes tirerack.com still shows the fronts as low stock but they do not have the rears

Thanks guys. But the package isn't opened yet, so i guess i'm not all safe yet, but close :) I'll let you know tomorro ;)

Quote:

---

Originally posted by thegreatdane
Thanks guys. But the package isn't opened yet, so i guess i'm not all safe yet, but close :) I'll let you know tomorro ;)

---

If you do have the rears please post contact info for this shop cause I'd like to get me a rear set.:)

Quote:

---

Originally posted by guaynabo89
If you do have the rears please post contact info for this shop cause I'd like to get me a rear set.:)

---

Yeah, same here.

Ok, i went to pick them up just now, and yes they sure are the red Koni's :) Both front and rear. They even included some Koni stickers :tongue: They've been made in Holland if that's of any interest. The shops email is [email protected] . I don't know if they're willing to ship overseas though.

Pictures?

Maybe sometime in the weekend. But with a crapy camera...

Quote:

---

Originally posted by thegreatdane
Ok, i went to pick them up just now, and yes they sure are the red Koni's :) Both front and rear. They even included some Koni stickers :tongue: They've been made in Holland if that's of any interest. The shops email is [email protected] . I don't know if they're willing to ship overseas though.

---

So are YOU willing to ship overseas? Like if, for example, someone sent you the money to purchase these, plus a little extra for your trouble, would you ship them to the US?

just a thought :D

Gregg

:werd: If you can get them and ship them here, I'm sure it's still less than getting Bilstein's revalved. Let me know soon, cause I gotta send the Bilstein's back. I haven't sent to be revalved so if this route is cheaper, I'm in.

Quote:

---

Originally posted by SteveDX89
:werd: If you can get them and ship them here, I'm sure it's still less than getting Bilstein's revalved. Let me know soon, cause I gotta send the Bilstein's back. I haven't sent to be revalved so if this route is cheaper, I'm in.

---

Including shipping the Koni's would probably cost around 700 US dollars. How much is it to get the bilstein's revalved?

Quote:

---

Originally posted by Gregg86DX
So are YOU willing to ship overseas? Like if, for example, someone sent you the money to purchase these, plus a little extra for your trouble, would you ship them to the US?

just a thought :D

Gregg

---

If you're willing to pay around 700 dollars (maybe more if it needs somekind of insurance if thats possible overseas?) for the koni's and shipping + pay me for the trouble, then yes. And you'd definately need to pay in advance.

I only need the Koni's for the rear. I already have fronts. How much would those be with shipping? Do you think you could contact them and see if they would ship to the States? That would be ideal but what would it cost if you shipped them?

Quote:

---

Originally posted by SteveDX89
I only need the Koni's for the rear. I already have fronts. How much would those be with shipping? Do you think you could contact them and see if they would ship to the States? That would be ideal but what would it cost if you shipped them?

---

:werd: Same deal for me. I have fronts, need rears.

Gregg

same here need rears:D

he posted the email addy.... why dont you just ask yourselves?

Travis

Just email them ;) They're nice guys :)
Rear Koni's including shipping will probably be around 365 dollars.

Quote:

---

Originally posted by thegreatdane
Just email them ;) They're nice guys :)
Rear Koni's including shipping will probably be around 365 dollars.

---

Is that price including shipping to US through you? That's a little bit more than getting Bilsteins revalved. Only by like 20 or 30 bucks though.

steve,
the guy wouldn't know how much the shipping would be to the US.
why don't you just email the company and ask them.
the shipping may be cheap.

I emailed them last week, they haven't replied yet. I'll try again. If I don't hear from them soon, I'm going to buy them through thegreatdane.

Quote:

---

Originally posted by shepherd79
steve,
the guy wouldn't know how much the shipping would be to the US.
why don't you just email the company and ask them.
the shipping may be cheap.

---

I was just going to e-mail them but since Site is on top of it, I'll wait to hear what he found out.

Sometimes they take a while to reply.

SteveDX89--> Yes through me, but as shepherd79 says, I cant be sure about the shipping price.

Here's your proof :)

http://medlem.jubii.dk/kagemonster/F...ni's_1.JPG http://medlem.jubii.dk/kagemonster/F...ni's_2.JPG http://medlem.jubii.dk/kagemonster/F...ni's_3.JPG

Quote:

---

Originally Posted by thegreatdane

Here's your proof :)

http://medlem.jubii.dk/kagemonster/F...ni's_1.JPG http://medlem.jubii.dk/kagemonster/F...ni's_2.JPG http://medlem.jubii.dk/kagemonster/F...ni's_3.JPG

---

Well its true, "you have em" Congrats. Hope that Site has luck with rears. I just ordered a set of fronts from Tire Track. What springs are you going to be using. :cheers:

Quote:

---

Originally Posted by nswst8

Well its true, "you have em" Congrats. Hope that Site has luck with rears. I just ordered a set of fronts from Tire Track. What springs are you going to be using. :cheers:

---

At first i'll try them with my 40mm lowering springs, though they are a little soft. If that doesnt work well together i'll find some that are fairly stiff. Which ones excactly, I dont know yet.
-Merry christmas...