Yes it's disc brakes from SE-i http://images.cardomain.com/member_i...73_36_full.jpg :jaw: :bandit:
Printable View
Yes it's disc brakes from SE-i http://images.cardomain.com/member_i...73_36_full.jpg :jaw: :bandit:
I hate you so much. :cheers:
those look to be in pretty good condition
You got a better deal than me. But I already have a spare set of calipers.
Refinish them before you put them on.
Did you pull them off a 2 door or 4 door and how many doors do you have.
reason I'm asking is I pulled mine off a 2 door and I need 4 door E-cables
and if you have the wrong ones maybe we could do some horse trading.
Congrats
NSWST8 :cheers:
I got them off a 4 door SE-i and thay are going on my 4 door LX-i I need the E-brake cables to :beat:
so is putting SE-i disk convesion hard to do? i just wanted to know. no biggie
Not a big complicated swap. Just some time and effort on your part.
Highly recommend the swap if at all possible.
NSWST8 :cheers:
hey tom, if you can score some more disk how about you let me buy them off you.
If someone has coupes e-brake cables, I may be able to trade. I'm going for some disc brakes next weekend. I'm gonna take what I can get so if it's a 4 door I won't be able to use the e-brake cable and will need one from a coupe.
If i find some more i will buy them and let you know but so far these are the only one's i have found i went out to pick n pull in stockton today just to take a look and there it was a complete SE-i the only thing the E-break cable was cut but today was a good day.Now it time to have a :beer: and :bandit:Quote:
Originally Posted by Busted_Blue
I have a set of E-cables for a coupe, and they look great.
If you come across a 4door and the e-cables are in good shape I'd trade.
So keep me posted.
Tom: Majestic has them from $49 apiece + S&H. If I can't score some here I'm going to have to buy them too.
NSWST8 :cheers:
dont forget the pain in the Butt part Bleeding out the Brake's after changeing out the that dam brake Valve in the Front :gun:Quote:
Originally Posted by nswst8
Not bad im still rebuilding my set and just took apart the calipers and stuff and are powdercoated so i just have to get the rebuild kit and re-assemble them. But yours look a lot better than mine did. I also have to get coupe e-brake cables cause mine came off a 4-door.
That's the easy part, one man bleed set up. Agood hand vac pump, bottle of brake fluid, couple of 1/4 inch clear line and your all set.
And you do need E-beake lines, spoke to soon. "aeh"
NSWST8 :cheers:
How does your E-cables look. I've got a set for a coupe and they are in great shape.
NSWST8 :cheers:
I just got some to.But I got the rest of the car to go with it :) :beat:
Grab a cookie and get back in your room. :cool2:
NSWST8 :cheers:
New E Beake Cable Thay are a little high priced but new but on monday i will check with Honda i get it at cost there i have a account there :admin:
Details.
NSWST8 :cheers:
Beer is Good :cheers: :beer: and when the night is over :barf:Quote:
Originally Posted by TWOLOUDNPROUD
well i was woundering if i do find the rear disc brkes like you are they really hard and what i need i got a 2 door coming soon and i wanted to change it to all disc let me know what i need and i can get some good prices where i work.. I get good discount and napa where i work... PLz let me know i new at this kind of stuff.... SWeeeeeeeet
Quote:
Originally Posted by Eric89Carb.
Disc Brake Conversion
The How-To has everything you need.
88-89 SEi Rear knuckle, calipers, rotors, E-brake cables and porportiong valve. you'll have to get this off a junked ride trying to purchase new is going to expensive and difficult. :bow:
If you go to the "How to" I believe there is thread on this already with all the specs.
Hope this helps. LOL
NSWST8 :cheers:
right on thnks for the help now i can get started now... easy stuff to get not to hard to get and cheap...
It's easy to get off the car. The problem is finding a car that has it and then not getting raped by the yard cause they know how rare the stuff is.
nah the guys here are stupid guys and the are only two on the island of maui but i think i can get it for cheap but thnks for letting me know
That How to for rear disk Break's is not that detailed it help's but not a whole lot when i do my rear disk i will take lot's of pic's and post them some time's pictures say more then word's if im wong tell me. To me pictures tell a better story and thay give you a better idea of what you need to do :owned:
all so i am going to do adjustable camber kit for Front and Rear and my DZ spring's i will have pic's for all to see :bow: this is to :help: other's when thay do there Accord :cool2:
86 Prelude front adjustable control arms $10 + $2 to get in.
I still want the details on your "cam gear"
Thanks,
NSWST8 :cheers:
I had the cam gear made at a cost 250.00 :jaw:Quote:
Originally Posted by nswst8
u lucky mofo! good score
is there a difference b/n sedan and coupe e-brakes?
if there is, i might be able to get some coupe ones and might want to swap for some sedan ones.
They are different part numbers.
I have a set of coupe, I need sedan.
NSWST8 :cheers:
As I previously said, anyone who has coupe e-brake cables hang on to them. If I get the discs off a sedan, I will definitely trade with you.
Dam E-brake cables at my cost from Honda are 54.65 each i called over 30 auto wrecker's no luck one of them told me that the 89 prelude will work on the 4door some one need's to take a look at that to see if it will :banned:
Nice, I have had everything to do the swap for about 4 months now but I'm to lazy to buy new pads and rotors for everything.
