O.K. I've searched plenty and really haven't come up with much...I know Dc made them...good luck finding one... so my question is......
Has anyone tried to make a front strut bar from another car? I heard the 90+ accord won't work.
Printable View
O.K. I've searched plenty and really haven't come up with much...I know Dc made them...good luck finding one... so my question is......
Has anyone tried to make a front strut bar from another car? I heard the 90+ accord won't work.
Make one. Test fit a civic bar and drill your own holes. I know there was a how-to on this site somewhere.
From my searching the civic bar will not work....
i think it depends on how much work you want to do. Im seriously thinking of just shelling out the 25 bucks for front and rears from a 92 civic and seeing how much work it'll need. If worse comes to worse, i'll just sell em to my buddy who has a civic like that.
DC still makes them, but they'll cost you an arm and a leg. I wish i had bought Alex's off him before he sold his 3g.
I don't care how much work it will take, because I'm good at working with my hands and stuff like that.....but if i have to get more parts fack that!
if you've got a few extra bux, get a 92 civic front bar off ebay and maybe even a 4g and see if they'll fit.
I don't want to waste alot of money if they won't work. I'm sure someone has to have tried something and gotten it to work.
I thought i heard back a little while ago that a civic bar and newer accord round parts that bolt to the frame will work if you put them together.
im making my own.. single bar across, then a V from the intake manifold to the firewall...
maybe even somthing from the subframe to the body...
Travis
there are some on kmods site
i had one on my fiesta that was super simple, yet strong as hell and looked good.
It was a 3/4" pip that was bent to angle toward the firewall (it actually rested against the firewall) and had two C shaped pieces at the end to bolt it to the strut towers. I just wish i had access to a pipe bender and a welder so i could make one.
Is where I got mine, paid $140 or so if I remember right, it was the cheapest I could find. I just didn't have the time to try and put one together.
Hope this helps.
Run out of funds "Bitesize"
Phil :cheers:
SOMEONE CALL AIM and see if they can make a strut bar for our cars.. they make other shit, so why not strut bars
www.truckn-store.com
800-892-8789
Travis
I have the Civic bar and some people have got it tp fit but what what I have seen it is a miracle they got it on and it works. On the cheap bars they have a bolt threaded at each end, if you could find some longer ones with the fish eye the civic bar would work and be realible cause as is that bolt is only threaded one turn into the bar, which means it is EASY for it to come out. Also I guy was able to get a 94 teg bar to work but I'm not sure how hard it was.
Why can't you find any DC Sports strut bars??? They still make them and you can get them from nopi.com and a few other online places, and I'm sure you can call DC Sports and order from them... I got one over the summer from a local shop and it ran $150 and fits absolutely perfect...
something is wrong with the damn SEARCH, I can't find that thread about the teg bar. But when I was looking I guess CIVIC 1992-200, DEL SOL 1993-1997, INTEGRA 1994-2001 all use the same bar. :pissed: I also found that if you use the APC civic/teg brackets with a APC 4g accord bar it will work.
$150 is a bit much for a strut bar IMO when you can get em for any other car for less then half that......
I paid $40-50 bucks for the one I used.
Quote:
Originally Posted by Darkside
And which one did you use?
I think he used one for a civic and modified it to fit by drilling an extra hole in each mount. I found my dc bar for $35 on ebay.
Alex
I am about to order a DC strut Bar for about $180... Still debating..
Too much $$$$$$$$$$$$$.
Quote:
Originally Posted by BITESIZE
I want a DC.. sacrifices have to be made!
Send me $180, I'll kick you in the ass, and we'll call it even.
Quote:
Originally Posted by BITESIZE
what strut bar are you planing to use?
Anything That Isn't $180, Shiz You Might As Well Buy A Header Or Something Useful
$180.00 way to rich for my taste.
Quote:
Originally Posted by BITESIZE
Have a header, custom 2.25 Exhaust. Not many headers available for our cars. Gotta jump on it , I guess.
Quote:
Originally Posted by Nuffice
Rims? Cam gear? anything else?
Nobody makes an Adjustable Cam Sprocket for the A20 as of yet!Quote:
Originally Posted by BITESIZE
Quote:
Originally Posted by Nuffice
I think you are wrong :321:
Quote:
Originally Posted by BITESIZE
Who makes cam sprockets for the A20?
who is the vendor bitesize.........please tell.
Gotcha..........nobody makes them, but you can get a grind on the shaft.
i've heard some guys in here talking about they made there own in a machine shop, maybe find the thread if interested and see if they could fab one for all interested.
Colt cams make cams for us. Gears that is. Cam grinds aren't really good anyways. Bad for your engine.
Yea yet is the key word there. If some people will send in some money for the gears we allmost have enough for the 25 gears. Take a look at the thread, I made a list.Quote:
Originally Posted by Nuffice
Quote:
Originally Posted by Justin86
I did.. You should send money as well, maybe some will follow your lead.
cam gears are a waste of money unless you have a good amount of other work done to the ignition too and access to a mechanic who's good at ignition timing. Or you're planning on doing that kind of upgrade in the future.
actually has more to do when you have a change in compression, but ok! There plenty of cars our there runing good times with STOCK Honda ignition.Quote:
Originally Posted by NXRacer
Cam gears are here:Quote:
Originally Posted by Nuffice
https://www.3geez.com/showthread.php?...4&page=7&pp=20
Go with DC if you want the DC strut bar... but there are cheaper alternatives.
I am in the planning and measurement phaze of making a strut bar for the front of my car, just don't know where I want it yet. Im trying to think of a way to get around that carb air box and brace it down in a H form. Might have to drill into the body and bolt it down, but still looking at the issues of it. Once I get it done, I will make lots of them for our cars (if they are all the same dimensions) and the rear ones too. either that or since I am still working on a how to, you can follow that and do it yourself. Better than paying $150+ for one that doesn't fit. It only costed me $20 to do mine, had access to tools at my high school auto shop class (grad in 98). Once I have the front planned out, I will start building it afterwards. But for now, still pondering on the front brace (not at the towers).
If there was anyone who lived by Sunnyvale in California, I could use some help on the decision making on the damn thing.
true but most of the people that want to buy one, they are all planing on doing some good mods in the future. I know I don't need one right now but when I slap on a turbo in a couple years I will need it.
Doesn't openloop make a cam gear? I'm pretty sure k-mods does. The bar I used was a 92 civic apc strut bar it has threaded ends the only "custom" mods required to make it fit is a single hole drilled in each side of the mounting brackets.
will the 92 civic bar fit around a weber??
YES I have a Weber.
ok thanks, how much was your strut bar?? and how much of a difference did it make in handling
For about $150.00 you can buy a piece of billet aluminum and have it machined to the right size and bolt pattern! that is if u can find a good machine shop!!!! Lots of good shops in western N.C.
sup man i wanted to know since u drilled extra holes to make that civic bar fit that u can tell me how u did it. cuz i got one off a 93 civic coupe and im sure with some work or drilling it would work. help me out man. thanks.
Go here: http://www.autosportz.com/suspension...ar_dcsport.htm
DC Sports Strut Bar, for 86-89 Accord FI $220 shipped and its yours. Comes in Red, Blue, or Silver.
the best way is to get front and rear 4th gen strut bar and do some minor modification as i did
fits perfect
you'll have to weld a bit
I got a DC one already in the front. i just one in the back. so i might have to weld some to get this 93 civic strut bar to fit my back? why i can just drill some holes an shit. that wouldnt work
Well how much work does it require to get the 4G to work. From what I have seen they are not long enough.Quote:
Originally Posted by L3G10N
trust me, they are long enough. I've bought 2 reative 90-93 accord strut bar Front/Rear. I'll try to take some pics as soon as possible. Or send me a great pic of a 4th gen strut bar and i'll show you where you'll need to modify.
oh so its 4th gen. my bad. yeah i would like to see some pics
ok cool :)
invest in a rear sway bar!!! that will help handling!
