pics are dead so this thread can be deleted
Printable View
pics are dead so this thread can be deleted
It's a type type R :O
indeed. extra RRRRRRRRRRRRRRRRRRRRrrr
i may put some wheels on it later so i can wheel it around
Always keeping busy!
wheels are on, Konis are in. fail is found
http://i687.photobucket.com/albums/v...D/PC040001.jpg
http://i687.photobucket.com/albums/v...D/PC040005.jpg
http://i687.photobucket.com/albums/v...D/PC040006.jpg
dash is out and so is the old heater and old OBD2 wiring thats no longer required.
http://i687.photobucket.com/albums/v...D/PC050012.jpg
New OBD1 dc2 loom with climate control. flash!
http://i687.photobucket.com/albums/v...D/PC050013.jpg
wow it totally looks like the RR hub is so bent that you can't even fit the factory wheel on it, or even a space saver, so it looks like you had to bolt the space saver on backwards!
im gunna do skids on that space saver when its going(Y)
First person ever to convert a Type R to 4x100.
Pretty clean shell though. Sucks that they painted the decklid black, considering the jams are white. People are idiots.
^ That, next thing he will do is swap in a D16z :)Quote:
Originally Posted by 2ndGenGuy
D series b jdm
i can only imagine how slow it would be with a d series. i have a b20b and vtec head to go on it later on..
amazing project Aaron, you have it wide open so you could put any crazy combination you want in that!
moar progress tonight. ripped out old loom and put in new climate control heater boxes to replace the shitty old dial heater controls. and the OBD1 wiring loom (ITR is OBD2 which is useless to me)
dash is now sitting in place.
http://i687.photobucket.com/albums/v...D/PC080013.jpg
http://i687.photobucket.com/albums/v...D/PC080012.jpg
http://i687.photobucket.com/albums/v...D/PC080014.jpg
http://i687.photobucket.com/albums/v...D/PC090015.jpg
Throw a j35 in there :D
Agreed :beer: .Quote:
Originally Posted by gfrg88
X3.
Hey a 4 lug ITR (4x114.3)
This looks like it is going to be a long endeavor, but as long as you are not in a rush, I'm sure it will come out just fine.
i cannot put another engine in without having to "re-cert" the vehicle which costs a fuckload. its gunna stay b series.
I know that Australia has very stringent rules for any modified vehicle, but would this also be the case for New Zealand?
i think aussie is worce. over here you can get away with mods if the car is certified as safe by a registered certifier guy that charges you 400 bucks and tells you to put in a CAT then you get a plate riveted to your engine bay that tells you what engine and suspension and wheels you MUST have to pass wof. and if you change any of those a re-cert is required. fuck that, im keeping it b series haha
so since it already has a cert for adjusties, wouldn't you 'legally' need teh sized wheels that the cert tag thingy says?
cert plate will be removed. even then all it says on the cert is OE engine OE wheels and adjustable suspension. if i ever get 'justiez ill rivit it back on
Little by little will get it done!
big update. the interior is in and i have borrowed an engine so i could drive it to auckland and pick up a new pair of doors. no more bog filled rusting door!
pics:
sir interior installed. will do for now
http://i687.photobucket.com/albums/v...D/P1120040.jpg
body is rough here and there, will require a WHITE bootlid at some stage and maybe a new bonnet as theres a ugly dent in the front of this one, both bumpers also need attention too. teks Hard boi
http://i687.photobucket.com/albums/v...D/P1120039.jpg
http://i687.photobucket.com/albums/v...D/P1120038.jpg
http://i687.photobucket.com/albums/v...D/P1120037.jpg
temporary engine, original B18CR, used about a litre of oil going to auckland and back, smokes like a bitch. cant expect too much the cars had a hard life and done 210000kms
running OBD1 with a chipped P08 and a stock crome b18cr map. Engine is mated to a open diff Y21 gearbox i got for $80 from a EG9. Had a fucked diff so i swapped another open diff in for now as i was in a hurry to get the car working. i have a ITR LSD to put into this box eventually.
http://i687.photobucket.com/albums/v...D/P1120043.jpg
Mugen power. 4-1 header into 2.5" jasma plated mandrel exhaust system and out a FGK muffler,sounds way better than the shit ass fart can it used to have.
http://i687.photobucket.com/albums/v...D/P1120041.jpg
http://i687.photobucket.com/albums/v...D/P1090033.jpg
http://i687.photobucket.com/albums/v...D/P1090031.jpg
got 4 new tyres going on the dc2 wheels this saturday!
awesome. Next step: B20VTEC...........
