Just on the bottom. What you have looks good.Quote:
Originally Posted by crucial
Printable View
Just on the bottom. What you have looks good.Quote:
Originally Posted by crucial
So is there anything else that needs attention?
If not ill run it on Monday.
Well let me know.
Can't think of anything else except the cam key. I'll get dimensions for that after the plate is mounted so we can get the correct offset. I ordered the viton o-rings. After we get everything sorted out, I can send you the bolts and required o-rings. I might also put some kits together for others.
Quote:
Originally Posted by LX-incredible
yay :-)
you would need rings on the other side of the plate....it wouldnt need to seal would it?
edit: you WOULDN'T need rings on the other side of the plate....it wouldn't need to seal would it?
this is awesome
No, only on the back side. The thermostat housing already has a groove for a D-ring to seal the front. The dizzy has an o-ring that seals against it's hole, just like stock.Quote:
Originally Posted by 2drSE-i
did you want a o'ring on the coolent port or a d'ring? A o'ring would be easier to get then the d'ring.Quote:
Originally Posted by LX-incredible
I want it to fit a stock D-ring. The mounting surface on the head won't allow for anything else. I suppose one could find the correct size o-ring and bend it to fit in the slot...
K, programs ready to run. Plan to run it one Monday, will take some pics too.
dude sweetness mastercam lucky you
you ever use inventor or autocad?
Sweet, thanks man!Quote:
Originally Posted by crucial
damn angus you're serious about this ish! just kidding man this is gonna be sweet.
Yes it is.
you'll have to show me when you get it you know.
Of course.
All that would be left is the cam key. I'm going to try and find a 4g at the yard monday with the dizzy attached, see how it lines up at TDC, and find out what offset is needed when I get the plate. Should be easy, provided they have one there...
Yay, good to see the R&D forum getting some solid use
So i talked to my girlfriends dad today and he said he would ship the part(s) for me. So that saves on the shipping costs. He said he would use fed x next day cause thats all he ever uses.
So after were done with this project I hope someone else has been inspired to wanna make something, I'm always up for a good challenge..
do you have any interest in making strut bars? because if so i may start getting some measurements.
he has access to a machine that can do 3D scans of an objectQuote:
Originally Posted by 2drSE-i
exact replica DC bars anybody? ;)
nice! me and lx-incredible went to the yard today and he took a look at a 4g distributor so he should have that shit figured out. so obd1 swaps should be pretty easy soon.
i was thinking of making the trim around the door handle out of aluminum i can supply the plate thick enough. would that be scannable? talking about the inside part, the plastic one that looks like crap. with all the interior work on this car that would look awesome. would you need one edge squared in the bridgeport first?
so where the pics of the finished product? :D
Yup, picked up a PR4 as well. Thanks again buddy!Quote:
Originally Posted by stat1K
No part today. Didn't have any open machines to run it on, the job im working on should be done tomorrow. So hopefully ill have something for you to look at. Sorry about that.
lol
yeah definately get those pics up. Its real nice of you to offer this service.
