Anyone installed a Bee R limiter on an A20A3 before? looking for a pinout of the ECU. thanks!
Printable View
Anyone installed a Bee R limiter on an A20A3 before? looking for a pinout of the ECU. thanks!
Google around for honda helms download. There are multiple websites and a thread here.
been using google, couldnt find much so i turned here. thanks
thank you so much!Quote:
Originally Posted by Shane86
No problem be sure to keep us updated get everything hooked upQuote:
Originally Posted by 86_Accord_Lxi
Ya, ive never heard of the thing before but def nice to have with high compression.
It's a pretty good feature I like it. I've never used this box.but should help with not spinning the tires too much getting off the line
Do you have an ignition cut limiter or 2 step installed on yours?
Both Two Step rev limiter launch control I use fuel cut though. I use it to hold the RPMs at a certain level for takeoffs. Mine is hooked up to a on-off switch when I go past 8 miles an hour it disengagesQuote:
Originally Posted by 86_Accord_Lxi
ah ok. im not seeing the pins i need to splice into on the pinout though. Attachment 9062Quote:
Originally Posted by Shane86
those are the wires on the limiter and what they do. handbrake is just a signal it uses to know when to actuate.
RPM signal is going to be the blue wire in the engine bay to the coil
yep, just trying to be sure it will work before i buy it. i dont want to have a 250$ fancy box that does nothing lolQuote:
Originally Posted by Shane86
Be sure to do some more research on it. For that kind of money it would be a good start towards a OBD1 conversion and have all those features and the ability to fully tune the carQuote:
Originally Posted by 86_Accord_Lxi
