-
Have a quick question? Ask it here!
I started this so the new guys can ask newbie questions here, We have a search, but it can be intimidating for a new person, ask your newbie questions here, and someone will direct you to the proper thread, or try to answer them here. I started this as a help to the new guys, make sure you post in the introductions forum, then if you have a question about things such as engine swaps, etc, we can help you to the correct thread. Maybe this will cut down on the new threads started, that only have the question, and then 30 replies of SEARCH!! I know it's not always easy being the new guy. :D
-
re: Have a quick question? Ask it here!
Where should I put a question about a squeak coming from the front of my car?
-
re: Have a quick question? Ask it here!
here's a start https://www.3geez.com/forum/showthread.php?t=1531 you can also look through threads in the suspension forum, then if you don't have any luck, try putting a post in technical
-
re: Have a quick question? Ask it here!
That thread is a good one. I'm going to check for those problems tomorrow. Thanks for your help.
-
re: Have a quick question? Ask it here!
88 lxi, rust everywhere.... even the mirrors...
fix it or drive it till it falls apart (was free)
-
re: Have a quick question? Ask it here!
drive it till it falls apart
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
A18A
drive it till it falls apart
After that, put it back together :idea:.
-
re: Have a quick question? Ask it here!
^i wasnt trying to postwhore at all. it was a serious question...
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
itzdave
^i wasnt trying to postwhore at all. it was a serious question...
what was the question again? i log in and my thread went crazy last night:sad2:
-
re: Have a quick question? Ask it here!
i asked, other than mounts, what all is required to put a B16/B18 into a carb'd 3GEE? like, do ya gotta do an A20 EFI swap first (gas tank, etc) or can ya just start doin it. what axles can ya use, etc.
the forum kinda lists what to do if ur already EFI, but not for the carb'd guys...
ya ya i know, 'SEARCH' will prolly be my responce, but isnt that the point of this thread?
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
itzdave
i asked, other than mounts, what all is required to put a B16/B18 into a carb'd 3GEE? like, do ya gotta do an A20 EFI swap first (gas tank, etc) or can ya just start doin it. what axles can ya use, etc.
the forum kinda lists what to do if ur already EFI, but not for the carb'd guys...
ya ya i know, 'SEARCH' will prolly be my responce, but isnt that the point of this thread?
you will probably need to do a lot of the same stuff you would have to do to change to Fi, you need the FI tank and pump, plus all the lines to start, none of the carb system is suitable for the pressure. all the FI stuff should bolt right in, you can always upgrade the pump later once all the fuel stuff is in
-
re: Have a quick question? Ask it here!
what about axles and a harness, whats the best way to approach those?
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
itzdave
what about axles and a harness, whats the best way to approach those?
you will probably have to make a harness or a hybrid harness, I'm not sure if anyone has ever done this, you have to take one step at a time
-
re: Have a quick question? Ask it here!
I guess this belongs here. So, the idle speed on my LX-i is normal at lower speeds with no check engine light. But once I get on the freeway, the check engine light shows up and my idle speed rises up to or over 1200 RPM warm. I think that it is important to include that my car was sitting for a long time until recently and hasn't had its oil changed in like 2 years (I know... but my dad changes oil every 6k and it hasn't hit that mark yet). My uncle thinks it's the EGR valve causing the problem, but I will get it checked back when I get my car back from the paint shop. But I'm just curious what you guys think it'd be. Any help is appreciated.
-
re: Have a quick question? Ask it here!
pull over and check the code on the ecu. then get back to us.
itzdave, you would think it would be easier to just swap in the entire ecu/engine harness. Then figure out the speedo and tach.
bullards b20 had some monstrosity of harnesses which made it hard to figure out. I think it was a Prelude engine harness and accord cabin harness. with a bunch of re-wiring.
-
re: Have a quick question? Ask it here!
Why do the front bumpers (USDM, not sure about others) have four holes in them, when both the license place and bracket only go into the same two? What are the two extra holes for?
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
itzdave
^i wasnt trying to postwhore at all. it was a serious question...
so was mine
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
roodoo2
so was mine
well, that was nice of him to delte everything...
:mod:
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
roodoo2
so was mine
i don't know who deleted everything, i was going to ask about installing the flux capacitor and a time continuium question, but i didn't get a chance
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
lostforawhile
i don't know who deleted everything, i was going to ask about installing the flux capacitor and a time continuium question, but i didn't get a chance
This message has been deleted by 87accordlxi. Reason: this isn't a postwhoring thread
im guessin he is the one that deleted them... lol
-
re: Have a quick question? Ask it here!
what do i need to change my 89 lxi drums to disc's
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
just1
what do i need to change my 89 lxi drums to disc's
you need to find an SEI at the junkyard
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
lostforawhile
you need to find an SEI at the junkyard
do 89 lude ones fit or a vigor rear end?
-
re: Have a quick question? Ask it here!
Quote:
Originally Posted by
just1
do 89 lude ones fit or a vigor rear end?
no all the parts have to come from an SEI, you can upgrade the brakes after you have the SEI suspension parts
-
re: Have a quick question? Ask it here!
my question remains, it was, "who is tim and where can i get naughty pictures of him?"
don't see why the mods deleted it... if we can't have fun here where can we have fun? 87 's just mad at me still :)