The prelude upper control arm how to is now working. Any problems or questions feel free to ask (to an extent AccordAddict :) ) Let me know if I missed anything, if something needs corrected, or just the general opinion it
Thanks
Vin
Printable View
The prelude upper control arm how to is now working. Any problems or questions feel free to ask (to an extent AccordAddict :) ) Let me know if I missed anything, if something needs corrected, or just the general opinion it
Thanks
Vin
Nice how-to man. Good work.
yea vinny great how-to it will help me alot when i am putting on my prelude arms on
Guys give a round of applause to the man among men. This a great detailed How To for the prelude control arm mod. :rockon: :rockon: :rockon:
aahhhhh, it could have been a little more informative....but i guess it works....
ehhh, pretty crummy work vinny. why the hell did they make you a mod anyway? You're useless! :rofl:
j/k man. how to looks great. Thats so good, you should write a how-to on how to write how-to's........:lol:
Thanks guys, even you Ryan :rolleyes: I'll be uploading the pics to the sites server later today or tonight so that they will be a permanent. No more lost pics and such that way.
Seriously if you guys think it needs anything or what not let me know. It'n not going to hurt my feelings if I missed something or if I get some negative feedback on it. I want it to be as user friendly as possible. Basically to the point you could do even if you are basically car retarded :ugh:
lol, ill let you know if you got everything down when i do mine. but first you gotta send the lude arms over to me free of charge so i can test the procedure out :D
That's how I need it. :sad2:Quote:
Originally Posted by Vinny
Great job there Vinny.....
I've got some more P/N's for you too if you like?
View: Federal Mogul Full
Vehicle: 1987 HONDA PRELUDE 4-1829 1.8L SOHC
Lookup Type: Group - Suspension Parts
MOOG
Upper Ball Joint
FRONT SUSPENSION 83-87 P/N K9404 2/car
TRW
Upper Ball Joint
FRONT SUSPENSION 83-87 P/N 10457 2/car
View: Federal Mogul Full
Vehicle: 1988 HONDA ACCORD 4-1955 2.0L SOHC
Lookup Type: Group - Suspension Parts
MOOG
Upper Control Arm Bushing/Kit
FRONT SUSPENSION 86-89 P/N K9580 2/car
Upper Control Arm Shaft Kit
FRONT SUSPENSION -
LESS BUSHING
PROBLEM SOLVER
ALLOWS MORE CAMBER ADJUSTMENT 86-89 P/N K90139 1/car
Control Arm Shaft Kit
FRONT SUSPENSION
MOUNTING STUDS - 1/4 DEGREE
CAMBER CHANGE 86-89 P/N K90140 2/car
Control Arm Shaft Kit
FRONT SUSPENSION
MOUNTING STUDS - 1 DEGREE
CAMBER CHANGE 86-89 P/N K90141 2/car
Control Arm Shaft Kit
FRONT SUSPENSION
MOUNTING STUDS - 1 1/4 DEGREES
CAMBER CHANGE 86-89 P/N K90142 2/car
TRW
Upper Control Arm Bushing/Kit
FRONT SUSPENSION 86-89 P/N 12464 2/car
MOOG
FRONT SUSPENSION
Caster/Cam Adjusting Kit
CAM STUD
ASSORTMENT K90139 86-89 1/car
Caster/Cam Adjusting Kit
CAM STUD
1/4 DEGREE PLUS OR MINUS K90140 86-89 1/car
Caster/Cam Adjusting Kit
CAM STUD
1/2 DEGREE PLUS OR MINUS K90205 86-89 1/car
Caster/Cam Adjusting Kit
CAM STUD
3/4 DEGREE PLUS OR MINUS K90206 86-89 1/car
Caster/Cam Adjusting Kit
CAM STUD
1 DEGREE PLUS OR MINUS K90141 86-89 1/car
Caster/Cam Adjusting Kit
CAM STUD
1 1/4 DEGREES PLUS OR MINUS K90142 86-89 1/car
Caster/Cam Adjusting Kit
CAM STUD
1 1/2 DEGREES PLUS OR MINUS K90207 86-89 1/car
I have alot of that info but decided not to use it for the simple fact not everyone carries the same branda at local parts stores. Honda is honda no matter what dealer you go through. I DO appreciate the info and will look more into it after I get back from Miami. I just dont want to overwhelm people with TOO much info. If that makes any sense
No Prob....I'm just a Partsman trying to help out after all. Some people like myself like the P/N's & some don't give a damn as they get someone else to do the work for them.Quote:
Originally Posted by Vinny
how many years you been stickin your nose in those part cataloges deathrat? i got 3 years under my belt :D fun job.Quote:
Originally Posted by DeathRat
LOLQuote:
Originally Posted by 86LXItooFAST4me
Try pulling wrenches for 10 years & doing Parts for 15 years
GM FWD Performance for 8 years now too
BTW! I'm 40 years old too!
well ive been turning wrenches unofficially on the old farm and in backs yards fixing other peoples shit since i was about 12. so ive been in this "area" i guess for about 9-10 years. i learned pretty much everything i know selling parts and shooting tha shit with all the mechanics that came in. i miss it alot.Quote:
Originally Posted by DeathRat
I miss the wrench turning too at times. But then I remember the snowy & rainy days while working under the trucks, & remember once again that I now get to stay clean & dry! LOL
Do you make as much money in parts sales?Quote:
Originally Posted by DeathRat
Unfortunately NO! But I'm trying too with my own store though.Quote:
Originally Posted by ddude2uc
The job in Parts is easier on the body, plus cleaner.
Just an FYI; if you are ordering the Moog camber adjustment "kit" you are only getting ONE adjuster. Two (wrong) are required for each control arm. So you will need to order FOUR total (wrong) if you are going to correct camber on both front control arms.
EDIT: ONLY ONE ADJUSTER PER SIDE IS NEEDED. Always read the instructions before doing the work.
Niles, there maybe a problem with them just be aware.
https://www.3geez.com/forum/suspensio...r-problem.html
I can't seem to find the thread for the prelude control arm mod can anyone help me find the link?
Get them off a prelude with flip up lights, then order new bushings and ball joints for them.
I've edited the link at the top of this thread to point to the how-to.
Where is the prelude control arm how-to now? I’m getting 404 errors from the link in the first post
Thank you!!
Linked is fixed...Thank you!