Selling out or scrap!!!!!!!!!!!
I have a B20A and a F2K5 tranny and a auto. Along with a 87 light blue hatch. Just checking to see if I get any interest before I scrap all of it. I also have 3 disk swaps and a few other things. I also have an 88 sedan (VERY ROUGH BUT RAN WHEN PARKED) parts car. Drop me a line if anyone is interested. Oh by the way the motor is in pieces but complete and the complete gasket for it also. The head was checked at a local machine shop and said ok. Has a bent rod but AccordB20A got me another one with piston. So I truly believe that a reliable motor can be built from this or I would not offer it for sale. Thanks and commonsense offers might just be taken. But on a little side note, I do not allow strangers to come to my home. (VERY VERY SORRY) but I have been broke in on twice for a total of $15700.00 dollars stolen. I will be more than happy to meet you some where of your choosing at no cost for your trouble. Thanks for reading this BS and hope you buy it all. Thanks Mike C.
Re: Selling out or scrap!!!!!!!!!!!
Sad to hear you are getting rid of things. Are you willing to ship anything and part out bits? I'm in Australia if you decide you want to.
Zaahir
Re: Selling out or scrap!!!!!!!!!!!
I also have three rear disc conversions.
Re: Selling out or scrap!!!!!!!!!!!
I will partout and ship anything but you will need to for boxing and shipping!!!
[QUOTE=zedries;1159597]Sad to hear you are getting rid of things. Are you willing to ship anything and part out bits? I'm in Australia if you decide you want to.
Re: Selling out or scrap!!!!!!!!!!!
hopefully there will be someone out there who would like a spare b20a manual gearbox. thats the single most hard to find part for the swap.
Re: Selling out or scrap!!!!!!!!!!!
You would think so. And I do not want an arm and a leg for any of it. I would have thought that someone would have wanted the B20A for a spare and I have a complete gasket set. But it will not be on here for much longer.
oh and I have arm rests cup holders poly bushings new lower front control arms also.
The 88 LXi only needs a head gasket and the 87 hatch need an auto (or 5 speed swap) to be a decent car. But if no one wants it then it will go to the great grave yard in the sky.
I also have a nice set of 15 inch 04 civic wheels and a set of 14 inch delsol wheels.
Did not mean to un load all this on you my friend, and thanks so much for the reply.
Re: Selling out or scrap!!!!!!!!!!!
people are too busy being sheep doing b swaps and stuff. its sad. im happy with my b20
Re: Selling out or scrap!!!!!!!!!!!
Quote:
Originally Posted by
AccordB20A
people are too busy being sheep doing b swaps and stuff. its sad. im happy with my b20
Easy for you to say Mr. JDM. :rolleyes: You can get all the parts you need for B20A. We aren't so lucky here in the US. :lol:
C|
Re: Selling out or scrap!!!!!!!!!!!
very true. i probably would have gone b series if i didnt buy the current engine i have now thats already built.
I cant believe nobodys bought this!
Re: Selling out or scrap!!!!!!!!!!!
I need the mirror base from the drivers side mirror, with the rubber piece, so I can use my power folding mirror
Re: Selling out or scrap!!!!!!!!!!!
Would you be able to send me your combo switch out of the sedan
Quote:
Originally Posted by
hammer3rd
you would think so. And i do not want an arm and a leg for any of it. I would have thought that someone would have wanted the b20a for a spare and i have a complete gasket set. But it will not be on here for much longer.
Oh and i have arm rests cup holders poly bushings new lower front control arms also.
The 88 lxi only needs a head gasket and the 87 hatch need an auto (or 5 speed swap) to be a decent car. But if no one wants it then it will go to the great grave yard in the sky.
I also have a nice set of 15 inch 04 civic wheels and a set of 14 inch delsol wheels.
Did not mean to un load all this on you my friend, and thanks so much for the reply.
Re: Selling out or scrap!!!!!!!!!!!
Hey cygnusx-1 You are the man and I thank you for all you have done for me. I built a very nice motor for my sedan but wound up putting it in a friends car. Pulls and runs very well. Thanks and keep on keeping on.
Re: Selling out or scrap!!!!!!!!!!!
what is the condition on the hatch tail lights and the filler piece that goes between them and the rear bumper? If they're in good condition what is the price shipped to 27316?
Re: Selling out or scrap!!!!!!!!!!!
Very sorry guys so long to reply. II will sell these things and others but I do not know what to ask. Please be honest and I will sell to you. Thanks for the replies.
Re: Selling out or scrap!!!!!!!!!!!
Re: Selling out or scrap!!!!!!!!!!!
Selling the F2K5?
I'm interested.
Re: Selling out or scrap!!!!!!!!!!!
Hello guys. Very sorry for the disappearances. I had some life changing events go on and here we are. Unfortunately the hatch is scrap. But is still have the JDM B20A and F2K5 and a gasket set. Also have 2 or 3 sei complete rear disc break sets. Cup holder map light I think vent visors and a complete sei front suspension. If interested please contact me and I will get back to you. [email protected] I would rather see it go to a user that in the scrap pile.
Re: Selling out or scrap!!!!!!!!!!!
Am I high or is that a 6 year necrobump?
Re: Selling out or scrap!!!!!!!!!!!
A welcome one if he has SE-I parts still
Re: Selling out or scrap!!!!!!!!!!!
Quote:
Originally Posted by
hammer3rd
Hello guys. Very sorry for the disappearances. I had some life changing events go on and here we are. Unfortunately the hatch is scrap. But is still have the JDM B20A and F2K5 and a gasket set. Also have 2 or 3 sei complete rear disc break sets. Cup holder map light I think vent visors and a complete sei front suspension. If interested please contact me and I will get back to you.
[email protected] I would rather see it go to a user that in the scrap pile.
Post a few pictures of the SEi setups!
Re: Selling out or scrap!!!!!!!!!!!
sent email. interested in transmissions.
Re: Selling out or scrap!!!!!!!!!!!
Locked. No response from author on 6 year old for sale thread.