-
A few B20A Part prices
06141-PH3-305 timing belt kit $40
15100-PJ5-020 oil pump ASSY $105
19200-PH3-000 water pump $90
061A1-PH3-000 cylinder head gasket kit $195
061B1-PH3-000 cylinder block gasket kit $55
For engine #s: up to 1550000
9/16/04-Update
Figured i should update the link since the old one is down. http://www.south.ne.jp/~spiosk/parts/e-info.htm If you email them part numbers of what you want they will get back to you with a total price with shipping for the order. There are a few general part numbers up top and im sure there are a lot more in other threads.
-
They look right....if I could get my parts catalog to work, I could tell you. Carot?
By the way, good work.
-
I have been spending a lot of time looking up stuff and a lot of places are not to helpful but this guy was the best in customer service i have dealt with but i am guessing the place in Europe is gonna be better just waiting for feedback. But i know a fellow B20A owner and that is where he gets his stuff from.
-
I'll have to double check these since my B20A engine has number 160XXXX (black top B20A)
All parts should be the same tough. I'm sure that it will be cheaper to get those parts in Europe :)
-
I found something odd.... the goldtop B20A uses the part number
15100-PJ5-020 for the oil pump but the blacktop uses 15100-PH3-010. are they really different to the point of not fitting?????
I suggest that you get the correct part number for your application but I double checked all the diagrams and they are 100% the same for both .... I guess that it doesn't matter which one you get... but don't count me on this
The head gasket alone is 11251-PH3-003 for the goldtop and I gouldn't check for the black top.
-
I used Mike's 86/87 B20A oil pump on my 88/89 block so it should fit fine.
-
Thanks YAsu, nothing like a someone who tried it to confirm what was theoricaly advanced :)
(damn I need money for parts)
-
Thanks guys I have found what i beleive to be a better source for parts and its actually in Canada. Im waiting for them to get back to me with prices but the guy in Georgia from Accuformance buys his parts from them for his B20A. Its a Honda Dealership as well.
-
Oh Rob!!! keep us updated on this one!!!! It would be a DREAM to have a dealer in Canada that get us parts for our B20....
-
Well i was on their website and you have to email them with a VIN# to get parts which i did. Im just waiting to hear back but i did push it and ask for a large price list. If i dont hear back by the end of next week i will contact them. I hope this works out but they definatly provided Scott the guy at accuformance with his parts so we will see.
-
I absolutely love what I'm reading here...keep us posted.
-
Any news from that dealer in Canada?
-
Not yet i sent them another email late friday but i told yasu who it was and he is close to them. It was www.surreyhonda.com so maybe if others show interest they will help us out. I know that they did get B20A parts before so i dont see why they havnt responded other than it was a long list. The only problem is they require a VIN# which i did give them for a B20A but i cant give out the number to others as the person wants it kept privately. I will let u guys know this week and if no responce maybe i can see Yasu can look into it since he is closer than me.
-
Well, I don't see why we couldn't just ask for part numbers. That should do it I think.
It not, just give us the beggining of the VIN # Only the 1st digits befor the production number. All those cars have those same numbers anyway, we can just any production number for parts ordering.
-
I think they can do it with part numbers no problem but i dont have all of them (of what i need) so thats why i used the VIN#. Otherwise i would have just emailed the part #'s. I will give it till wed or so then try by part numbers.
-
Ok guys heres the deal i talked to the parts manager and he can do it with part#'s but i would rather price all the main parts once so if you can add to my list of common parts and i will email him the one list then we can compare prices with the other vendor. This is what i have from before:
06141-PH3-305 timing belt kit $40
15100-PJ5-020 oil pump ASSY $105
19200-PH3-000 water pump $90
061A1-PH3-000 cylinder head gasket kit $195
061B1-PH3-000 cylinder block gasket kit $55
These were the prices from WWW.japaneseparts.com and when we finish the list i will post post prices so we can compare them. But i think Surrey honda will be better cause they are a dealership so no middle men involved like the other place.
So if you have part numbers like the front/ rear mount other seals etc we can get all of them priced.
-
Most of the other parts are available here on the USDM Prelude or Accord.
I can post the individual seals or gasket that are only available in Japan.
1- Head Gasket
2- Oil pan Gasket
I'm not sure about the valve cover gasket tough.
Like I said, All the other seals are shared with the USDM Lude (even the valve seals)
Please correct me if I'm wrong.
-
Ok i will submit this list and post the prices and expected wait time for them to get them. Also i gave him the VIN# on the phone and it didnt work cause he can only use Canadian VIN's. But part#s will be fine so i will let you know what they send back. Thanks for the help Carotman and Yasu
-
ok where did you guys get your engines in the first place?
-
I am planning on buying mine soon but i know a few places that can help me. I will post them up soon but i dont want to sell the motor i plan on buying cause that one place only has the one. Im not trying to be an asshole but i spent a lot of time finding place and dont want to blow my hard work. But should be real soon but i know one place said that particular motor was flagged down in Japan not to be exported? Dont know why but i heard him call his vendor when he put the phone down. Basically i know 2 places to get them and a board member is still trying to sell his but it has 12:1 compression that turned me away.
-
Ok i got the email back to my disappointment that the only part# that worked was the water pump# for $65.17 canadian. But i guess i will go through my first importer and do one big order since it comes right from japan. But i must say parts are not as hard to get as i thought it just took a lot of emails and phone calls on my end. But i emailed the guy at Accuformance to double check on where he got his JDM parts but maybe he only got a few things. So if you guys need parts badly just email the guy at japaneseparts.com with the part #'s and they will get them but you will pay shipping from japan.
-
Is there any way i can find a book to help me put a B20 in? new comer
-
The only thing i can say is the Honda manual for the accord and maybe the prelude B20A. Its kinda based on experience thought and a book is not gonna tell you step by step everything althought the honda book is pretty close but its not for the Accord B20A. I also just want to say its not so easy to find a B20A and one that has a 5spd so this swap is gonna take time and money.
-
hey accord si have u actually done this yet
1988HondaAccord | JDMB20A | CivicTypeRPistons | 11:1CompressionRatio | 8000Redline | 280/280CrowerCams | DualWeber45DCOE | Port&PolishedHead | CustomColdAirInduction | K&NFilter | MSD6AL | MSDBlaster2Coil | MSD8.5mmPlugWires | ACTHeavyDutyClutch | ACT6PuckCopperDisc | JDMPreludeTypeSHeader | 2.5"CustomExhaust | ArospeedMuffler | GroundControlCoilOvers | KoniAdjustableShocks | PreludeVtecBrakeUpgrade |
-
He's done it and drives it. His motor was stock in that car, cause it's in Peurto Rico. Lucky bastage ;)