i dont understand what you are saying. my a20a3 is auto, are you saing i can use something in there?Quote:
Originally Posted by TWOLOUDNPROUD
Printable View
i dont understand what you are saying. my a20a3 is auto, are you saing i can use something in there?Quote:
Originally Posted by TWOLOUDNPROUD
yes, i will be using aluminum forthe plate. i am going to build the plate incase i blow up this tranny, it will make it esier to swap. no need to modify the end of the shiftlinkage, ill just use the whole integra shidter assembly. i already have an aftermarket b series tranny mount brack that ill weld insode the engine bay once i see exactly where the tranny will end up. as far as a xles go, one of our accounts for the towing company used to one silent drive, a axle company in boston. he now has a junkyard, ill ask him about shorthnig it or usring a different longer axle and shorthing that
On the a20a3 auto trany between the crank and the flex plate there is a crank space that what i am sayingQuote:
Originally Posted by SQ is the SQUAD
if i have time today i am gonna pull off my auto tranny to see what your talking about
i took the auto tranny off earlier and the lil space that was in there was way too thin. it would tale 8 0f them to equal 1/2" but on the bright side i can use it as a trmplate for when i get my sheet of aluminum so that i can drill ome out. jason budd said that the longer bolts he used for thr flywheel are acutally arp bolts. the needed a lil shaced off the end, no biggie. just trying to see if i can get the part number
some come on update us
are you done yet? j/k ;)Quote:
Originally Posted by SQ is the SQUAD
seems to be coming along well.
everything is on hold until i finish moving into my sisters garage. no garage at my house
Quote:
Originally Posted by SQ is the SQUAD
hey man did you move yet or what!
hows the adapter comming along?
Bringing this back from the dead.
I know that life happens, but did you get any further with this project?
So I am looking at h2b kits. Does anyone know if this h22 crank bolt pattern is the same as the a20. I am looking at the h2b fly wheel as possible answer to the spacer delema. If so all that is left is the transmission spacer. Now there could be a possible answer to that as well with the h2b transmission spacer.
^^^ im instead as well
I sent out some emails.
Im gonna go and by the wood to make a template. I have a b series trans and I'll just pull my trans and trace them both.
I got one email, they said they don't do 1 offs or even 10 offs. Lol
Wow. It ok just to sorry i can't help you sometimes. Lol i figured i would have to find a local shop to do it. I know a couple of places. I've also talked to chedda auto and he said he would ne will to do it for us. Not sure what yhe cost eould look like tho
Look at what i found! A Factory honda crank spacer.
http://images.tapatalk-cdn.com/15/10...145eb5041a.jpg
Lol.
Sick one step closer
I think I just figured out the b series clutch swap for the a20 trans. Think I'll keep that under wraps for now.
I see how it is
Have to test it
first.
Welp it been year's since this was updated. But here you go. Also if you would like to get yourself one rech out will get a list going so as I test the plate in coming weeks. [emoji320][emoji319][emoji318][emoji482]
https://www.facebook.com/groups/3gee...5611320491415/https://uploads.tapatalk-cdn.com/201...339a0b505f.jpghttps://uploads.tapatalk-cdn.com/201...e2a5261dfe.jpg
Sent from my SM-N950U using Tapatalk
Welp the first step in many to come. But the prototype has arrived and the spacer is on it's way. I'll source the need harder and go from there.https://uploads.tapatalk-cdn.com/201...cb83a824f2.jpghttps://uploads.tapatalk-cdn.com/201...1dad9ef6ca.jpghttps://uploads.tapatalk-cdn.com/201...f7c6646752.jpghttps://uploads.tapatalk-cdn.com/201...1e3ccda239.jpghttps://uploads.tapatalk-cdn.com/201...9d1d4ecb04.jpghttps://uploads.tapatalk-cdn.com/201...8202399766.jpghttps://uploads.tapatalk-cdn.com/201...fcd2fbf45e.jpghttps://uploads.tapatalk-cdn.com/201...3f655f32f4.jpghttps://uploads.tapatalk-cdn.com/201...6daa66c792.jpg
Sent from my SM-N950U using Tapatalk
It should be there today.
Sent from my SM-T800 using Tapatalk