2DrSE-i's....SE-i Buld thread
This is my Project SE-i build thread! This is where I will put my To-do list, as well as current progress. Currently, I am getting the car ready for Import Alliance 2010! Heres my to-do list
- Get a new Passengers seat (Ripped OEM leather makes Amy angry...LOL)
- OBD1 Swap
- Timing Belt
- P/S Pump
Thats all I have for now.
Re: 2DrSE-i's....SE-i Buld thread
In Progress, OBD1 Swap!
Distributor Adapter Plate. Bought from Cygnus-x1! Amazing quality, everything is there. WELL worth the money, Buy while you still can!
http://lh6.ggpht.com/_z3UepmbX5NE/TL...018_114056.jpg
I forgot my old pictures are all on my old cell phone of my OBD-1 harness, so I'll have to get those off to post them.
Re: 2DrSE-i's....SE-i Buld thread
In Progress, New Intake Manifold!
B16 Intake Manifold, OpenLoop ported and matched, Stock B18a throttle body (58mm)
http://lh5.ggpht.com/_z3UepmbX5NE/TL...018_112349.jpg
Re: 2DrSE-i's....SE-i Buld thread
Re: 2DrSE-i's....SE-i Buld thread
how about....doing a claybar on that car? I think you could really restore a lot of the color.
Re: 2DrSE-i's....SE-i Buld thread
you think so? its wprth a shot, but that oxidation is pretty bad. i think if anything the claybar will help out the chips on my hood.
Re: 2DrSE-i's....SE-i Buld thread
Yay for progress. Well, a little anyway.
Picked up a new drivers seat today. Compared to the tired stock one, looks great!!
http://www.axcessmypics.com/photos/p...2ff912a1b2.jpg
Re: 2DrSE-i's....SE-i Buld thread
Re: 2DrSE-i's....SE-i Buld thread
Rex seats actually, but thanks!
Re: 2DrSE-i's....SE-i Buld thread
OK Hazwan, so i owe you an apology. After doing a bit of research, the CRX i found that seat in actually had a prelude drivers seat in it, and no passengers seat. So i do, in fact, have a prelude seat sitting in my office right now.
Re: 2DrSE-i's....SE-i Buld thread
Yes most definitely poolude seats
Re: 2DrSE-i's....SE-i Buld thread
yeah i was about to say...no crx came with thoes seats
Re: 2DrSE-i's....SE-i Buld thread
Hey, You should put a H22 in it
Re: 2DrSE-i's....SE-i Buld thread
Quote:
Originally Posted by
Civic Accord Honda
Hey, You should put a H22 in it
Nope, nope. NA A20 is the plan. I've got goals son!
Re: 2DrSE-i's....SE-i Buld thread
Re: 2DrSE-i's....SE-i Buld thread
Quote:
Originally Posted by
2drSE-i
Nope, nope. NA A20 is the plan. I've got goals son!
lol...thats what i said...obd1 is a must to tune the car because my stock ecu runs my a20 really crapy
Re: 2DrSE-i's....SE-i Buld thread
Re: 2DrSE-i's....SE-i Buld thread
Quote:
Originally Posted by
MessyHonda
lol...thats what i said...obd1 is a must to tune the car because my stock ecu runs my a20 really crapy
Thats in the plan as well. If i had money i'd already have the distributor plate
Re: 2DrSE-i's....SE-i Buld thread
If its red car than no clay will help, Red is most exposed color to the sun so it bleaches over time. one thing you can do is to strip clear ans respray clear cote. as far the cheapest option.. I had a friend do this to hes BMW e28.. looked sexy after that.. Not perfect but better.
Re: 2DrSE-i's....SE-i Buld thread
^whoa when did you become a mod? I just noticed that now :O. sorry for the o/t
Re: 2DrSE-i's....SE-i Buld thread
Umm, yesterday.. Im a Project Center Mod :D
Re: 2DrSE-i's....SE-i Buld thread
Quote:
Originally Posted by
Tomisimo
Umm, yesterday.. Im a Project Center Mod :D
Congrats :)
Re: 2DrSE-i's....SE-i Buld thread
No progress really. I got hit a couple of months ago in the rear quarter, fubared it all up. Still working out payment on that. I'll be keeping the car regardless.
I did get my suspension parts. Upper control arms, bushings, radius arm bushings, lower ball joints, outer tie rod ends.
Re: 2DrSE-i's....SE-i Buld thread
Bump! Did a bit of work on the car today. I've had a Vigor mirror (Thanks for the info Messy, it is a nice upgrade!) for a couple of months, and some new pioneer speakers for a couple of years (YIKES). Finally decided to get to work on them.
Old Stock, small mirror
http://www.alltelmypics.net/photos/p...b5aaf5932e.jpg
Stock mirror on top of Vigor Mirror
http://www.alltelmypics.net/photos/p...0900e207c4.jpg
New mirror installed!
http://www.alltelmypics.net/photos/p...af5fdb38fd.jpg
Now the issue with the speakers (and why its taken me FOREVER to get them in) Is the fact that the stock speakers in the SE-i are SUPER TINY and the OEM Bose speaker enclosure is too. This is the OEM Bose enclosure with the speakers my dad bought me for my 16th birthday. Needless to say, with 6x9s in the back, these aren't heard much.
http://www.alltelmypics.net/photos/p...ed7fa692cc.jpg
Heres the OEM 6.5" speaker enclosures. The speakers I bought are Shallow mount, but to fit in the OEM baskets, they would have to be incredibly shallow. Only a few speakers actually fit.
http://www.alltelmypics.net/photos/p...883247949f.jpg
Clearly these aren't one of those few.
http://www.alltelmypics.net/photos/p...744cbc3f39.jpg
Heres what i did!
Safety first...These are my shooting glasses, don't make fun of the ULTRA TACTICALNESS YELLOW HIGH DEF glasses.
http://www.alltelmypics.net/photos/p...9b31e0cb89.jpg
First pass with the dremel
http://www.alltelmypics.net/photos/p...ea29653759.jpg
All done!
http://www.alltelmypics.net/photos/p...85f5c7e897.jpg
Test fit, much better!
http://www.alltelmypics.net/photos/p...3d8c8268e7.jpg
Re: 2DrSE-i's....SE-i Buld thread
Installed
http://www.alltelmypics.net/photos/p...a63a7f8bb0.jpg
And all back together.
http://www.alltelmypics.net/photos/p...e779ff49d5.jpg
Someone please bring stock coupe/hatch speaker mesh to the meet....I'm sick of the ricetastic ones. Oh why was i so young and ignorant! Thanks for reading! Sorry for the cellpics..