http://youtu.be/5l5uzqoWfLA
Printable View
damn that is bad, it sounds like a subaru too
Ehhh ur motor might've lost compression on a pistion... Check it man..
It does sound a lot like my Jeep when it has decided to lose a cylinder.
I'm afraid that's what it might be.. :nervous:
Oh wells. if that's the case, then I guess it just means I'll have to build the engine a lot sooner than I hoped :D
it almost sounds like it has rod knock.
Weird part about it is, when I was driving it back home. it would smooth out partial throttle, half throttle not so great, full throttle after, 3500 rpms would be ok again :sigh:
Gio, pull the pan and check the bearings.
If I don't end up going camping this weekend, I will do it.. if not I guess it'll have to wait till next weekend :(
here's a plus for today. I got my 3rd gen lude bumper delivered. :hs:
Sooooo, I had like 30 mins to check some more stuff on my lunch break.. I unplugged each injector to see if anything would change. Injectors 2 and 3 didn't make a difference at all. You guys think it might be bad injectors?? I'm honestly just trying to eliminate everything else before having to pull the pan, again.
sounds like a rod knock. I would pull the pan bro. You might have to pull the motor.
Loosen the dizzy and adjust it to see if its a timing issue... kinda what it sounds like it could be if its nothin else. Also if you long extension or long screw driver listen to each injector. You should hear a metal soleniod sound. Could be a wiring chip issue.
damnit.. I don't wanna go anywhere this weekend anymore and work on the car and see what the hell is up!! :rant:
Good, now get to work! ;)
I got everything pulled already :D
So here's the deal. Before I started ripping everything off, I checked the compression. 100 in 1, and 4. 2, and 3 both were at 50-55 :hs:
Sooo, here's what I'm thinking. I blew head gasket somewhere in between 2 and 3. sigh. I noticed the coolant was low too. fml..
Well that's still super low . Hope it all goes well
yeah. I know. I just want to get it running for now. Give it some boost, then rebuild over winter time :)
I think I might as well order some head studs while I'm at it.... maybe bisi cam, cam gear, springs.. Idk what to do about valves yet..
http://i19.photobucket.com/albums/b1...5-28161144.jpg
http://i19.photobucket.com/albums/b1...5-28161158.jpg
Just what I thought. :hs:
Pistons
really thinking about getting these...
am i good or what :)
sweet...get a new headgasket and some arp studs...get her done